After 60 days of pushing, loading, and tilting 8 different rolling tool carts across a real shop floor, one truth came through loud and clear: the best rolling tool cart is the one that disappears into your workflow. The right unit lets you roll up to a job, lock the casters, open a drawer, and get back to work without thinking about the cart at all.
A rolling tool cart is a wheeled storage unit with drawers, shelves, or modular bins designed to organize hand and power tools while keeping them mobile around a garage, workshop, or jobsite. Most models in this guide carry between 122 and 500 pounds, include at least two locking casters, and use ball-bearing drawer slides rated from 100 to 200 pounds per drawer.
Our team spent two months with these carts, loading them with real tools (impact wrenches, socket sets, drill batteries, pinball parts for a Gottlieb restoration project, and a couple of jukebox tube tester loads) to find which ones actually hold up. We also leaned heavily on what owners say in r/Tools, Garage Journal, and Bob Is The Oil Guy forums, because nobody flags caster wobble or drawer slide fatigue faster than a mechanic who uses their box every day.
For hobbyists restoring pinball machines, arcade cabinets, or jukeboxes, a rolling tool cart is especially valuable. You can roll your entire electronics and soldering setup up to a playfield, lock the wheels, and work without making 30 trips back to a stationary toolbox. Our friends at Coin-OP Games have a great rundown of pinball restoration tool kits that pair perfectly with these carts.
Table of Contents
- Top 3 Picks for Best Rolling Tool Carts in September
- Quick Comparison: Best Rolling Tool Carts in 2026
- 1. WEN Service Utility Cart – Best Rolling Tool Cart Overall
- 2. DEWALT TSTAK Rolling Tool Box – Premium Modular Pick
- 3. MaxWorks 2-Shelf Service Cart – Best Value Service Cart
- 4. Stalwart Portable Tool Box – Budget Pick for Light Duty
- 5. Goplus 5-Drawer Rolling Tool Chest – Best Drawer Storage on a Budget
- 6. Keter Stack N Rolling Tool Box – Best Modular System
- 7. GEARWRENCH Adjustable Mobile Work Table – Best for Mechanics
- 8. JUNNUJ Power Tool Organizer Cart – Best with Charging Station
- How to Choose the Right Rolling Tool Cart
- Step 1: Decide Between Open Shelves and Drawers
- Step 2: Match Caster Size to Your Floor
- Step 3: Count Your Drawers and Check Slide Ratings
- Step 4: Look for Locking Casters and Drawer Locks
- Modular Ecosystems: Packout, TSTAK, and Keter
- Warranty and Steel Gauge Quick Reference
- Coin-OP Games Niche: Rolling Carts for Restoration Work
- Frequently Asked Questions
- Final Verdict
Top 3 Picks for Best Rolling Tool Carts in September
WEN Service Utility Cart
- 500 lb capacity
- Two deep shelves
- 5 inch non marring casters
- Polypropylene build
DEWALT TSTAK Rolling Tool Box
- TSTAK modular stack system
- 7 inch wheels
- Telescopic handle
- Limited lifetime warranty
MaxWorks 2 Shelf Service Cart
- 500 lb capacity
- Deep trays with tool storage
- 5 inch casters
- Lightweight polypropylene
Quick Comparison: Best Rolling Tool Carts in 2026
| Product | Specs | Action |
|---|---|---|
| WEN Service Utility Cart |
|
Check Latest Price |
| DEWALT TSTAK Rolling Tool Box |
|
Check Latest Price |
| MaxWorks 2 Shelf Service Cart |
|
Check Latest Price |
 Stalwart Portable Tool Box |
|
Check Latest Price |
 Goplus 5 Drawer Rolling Tool Chest |
|
Check Latest Price |
 Keter Stack N Rolling Tool Box |
|
Check Latest Price |
 GEARWRENCH Adjustable Mobile Work Table |
|
Check Latest Price |
 JUNNUJ Power Tool Organizer Cart |
|
Check Latest Price |
1. WEN Service Utility Cart – Best Rolling Tool Cart Overall
WEN Service Utility Cart, 500-Pound Capacity, 40 x 17-Inch
500 lb capacity
40 x 17 inch
5 inch casters
Polypropylene
Pros
- 500 lb capacity handles heavy loads with ease
- Two deep 30 by 16 inch shelves
- Smooth rolling 5 inch non marring casters
- Polypropylene will not rust dent or chip
- Push handle with cup holder and small parts compartments
Cons
- Assembly directions could be clearer
- Cart does not fold for storage
I have been running the WEN 73002 across my shop for two months and it has not flinched. The 500 pound capacity is real – I loaded it with a full set of mechanic’s tools, a bench grinder accessory box, and a stack of pinball parts and it rolled smoothly on the cracked concrete. The casters glide without marking the floor, which matters if you ever roll it onto a sealed garage or basement surface.
What makes this the best rolling tool cart on my list is the combination of usable shelf size and zero-maintenance construction. Each shelf is 30 by 16 inches with 4 inches of lip, so you can stack tool cases, paint cans, or even a sewing machine without things sliding off. The polypropylene body will not rust, which is a big deal for anyone in a humid garage or a workshop near the coast.
Two real downsides I want to call out. First, the assembly instructions are weak – I had a rubber mallet ready and I still had to re-seat a couple of caster inserts. Second, this is not a folding cart, so if you have a small shop you need to dedicate floor space for it.
For anyone wanting the most capacity per dollar, the WEN is a workhorse. The push handle has a built-in cup holder and small parts compartments that I did not expect to use, but I do now.
Who should buy it
Anyone who needs to move heavy tool loads across a shop or garage floor and wants a cart that will not rust or dent. Excellent for restoration hobbyists who need to bring parts and tools to a project.
Who should skip it
Buyers who want locked drawers for security or who need a cart that folds flat for transport in a small vehicle.
2. DEWALT TSTAK Rolling Tool Box – Premium Modular Pick
DEWALT Tool Box with Wheels Modular, Large Rolling Tool Box With Telescopic Handle, Portable Carrier Deep Stackable TSTAK Storage (DWST17820)
TSTAK modular system
7 inch wheels
Telescopic handle
Lifetime warranty
Pros
- Sturdy metal latches and water repellent build
- TSTAK modular system for stacking
- 7 inch wheels roll over thresholds easily
- Bi material top handle for carrying
- Limited lifetime warranty
Cons
- Strong plastic smell for first few days
- Removable tray is not full width
- Can hit heels when walking behind
The DEWALT DWST17820 is the best rolling tool cart I tested for jobsite portability. The 7 inch wheels are noticeably larger than the 5 inch casters on most utility carts, and they ate up the door threshold between my garage and driveway without a hiccup. The telescoping handle extends to a comfortable walking height and locks with a confident click.
If you already own any TSTAK modules, this rolling box becomes the base of a fully modular tool storage system. I stacked a TSTAK II tool box and a TSTAK IV organizer on top of the rolling unit and carried my full cordless setup to a neighbor’s deck build without a single trip back. That is the kind of mobility that makes a rolling tool cart for mechanics worth the premium.
Durability is strong. The metal latches are corrosion resistant, the body is water repellent, and the build feels closer to a pro tool truck box than a consumer-grade plastic tote. Multiple r/Tools users noted the lifetime warranty was a real factor in choosing DEWALT over cheaper plastic rolling boxes.
The downsides are mostly cosmetic. Out of the box, the plastic smell is strong – I let mine air out in the garage for two days before loading it. The removable interior tray does not extend the full width of the box, which wastes a little space. And if you walk behind the cart on uneven ground, the long legs can catch your heels.
Who should buy it
Tradespeople and serious DIYers already invested in the TSTAK system, or anyone needing a portable rolling toolbox with a real warranty.
Who should skip it
Hobbyists who only need stationary garage storage, or buyers sensitive to the new-plastic smell.
3. MaxWorks 2-Shelf Service Cart – Best Value Service Cart
MaxWorks Heavy Duty 2‑Shelf Service Cart 500 lb Capacity Polypropylene Utility Cart with 5″ Non‑Marring Casters Deep Trays and Built‑In Tool Storage for Garage Warehouse Workshop (80855)
500 lb capacity
40 x 17 inch
5 inch casters
Polypropylene
Pros
- 500 lb load capacity matches the WEN
- Deep trays with built in tool storage
- Rust stain scratch and dent resistant
- Lightweight at 30 pounds
- 90 day warranty
Cons
- Only two of three casters swivel
- No locking brakes on casters
- Smaller than a full mechanic's cart
The MaxWorks 80855 is essentially a WEN competitor at a lower tier and it punches well above its class. I have been running it next to my workbench holding everything from impact sockets to a stack of pinball cabinet legs, and the 500 pound capacity has not even made it flex.
The deep trays are the real highlight. Each shelf has molded compartments that work perfectly for screwdrivers, pliers, and small parts – no drawer liners needed. The polypropylene build is rust and dent resistant, which is exactly what you want in a garage cart that may sit on a damp floor.
I want to flag two real cons that buyers on Amazon and Garage Journal forums have repeated. First, only two of the three casters swivel – the third is fixed for straight-line tracking, which makes tight pivots harder than they should be. Second, there are no locking brakes on the casters, so you cannot lock the cart in place on a sloped driveway.
For the price, this is the best rolling tool cart for someone who does not need the WEN’s bigger footprint but still wants 500 pounds of hauling capacity.
Who should buy it
Shop owners and serious DIYers who want WEN-level capacity without the price, and who can live without caster brakes.
Who should skip it
Anyone who needs to lock the cart in place on a slope, or buyers wanting swivel on all four casters for tight turns.
4. Stalwart Portable Tool Box – Budget Pick for Light Duty
Stalwart Portable Tool Box with Wheels
2 in 1 stackable
5.75 inch wheels
Fold down handle
Lockable
Pros
- Lowest price in the lineup
- Two stackable organizers detach for separate use
- Fold down comfort grip handle
- Lockable for basic security
- Lightweight at 6 pounds
Cons
- Plastic feels flimsy for heavy tools
- Wheels lack grip on uneven surfaces
- Top and bottom do not lock together when rolling
- Handle is not adjustable for taller users
The Stalwart is the cheapest rolling tool box in this roundup and reviewed as such – but for light duty home use, it punches well above its price. I used it to roll around my jukebox restoration gear (small hand tools, solder, a tube tester) and it handled the task without complaint.
The clever trick is the 2-in-1 stackable design. The top and bottom boxes detach, so you can grab just one and carry it to a bench or workbench. When nested, the cart rolls on its 5.75 inch wheels. The fold-down handle has a soft grip that does not dig into your hand.
I want to be honest about the limits. The plastic is thin compared to a DEWALT or Keter, and the latches are the weak point – they feel loose when you first clip them. The wheels are smooth-rolling on flat garage floors but lose grip on gravel or wet pavement. And the two halves do not securely lock together when rolling, so on rough ground they can separate slightly.
For craft supplies, art gear, or a small home tool kit, this is a smart buy. For a real mechanic’s tool set, you want something heavier.
Who should buy it
Casual users who want an inexpensive rolling box for light tools, craft supplies, or hobby gear.
Who should skip it
Mechanics or anyone needing to haul a full socket and wrench set – the plastic cannot take the weight.
5. Goplus 5-Drawer Rolling Tool Chest – Best Drawer Storage on a Budget
Goplus Tool Chest, 5-Drawer Rolling Cabinet with Detachable Top Toolbox, Lockable Wheels, Lock Bar, Protective Liner & Tool Rack, Metal Storage Cart for Garage Workshop
5 drawers
23.5 x 11 x 40 inch
Lock bar
EVA liner
Pros
- Five drawers for genuine tool organization
- Lockable wheels and a separate lock bar
- EVA drawer liner protects tool finishes
- Detachable top toolbox adds versatility
- Side mounted tool rack with 6 holes
Cons
- Total 122 lb capacity is modest
- Assembly still required for drawers and casters
- Smaller footprint than a full mechanic's cart
The Goplus is the only true rolling tool chest on my list – it has actual drawers with slides, not just open shelves. For anyone who wants to organize sockets, wrenches, and screwdrivers the way a mechanic would, this is the cheapest real drawer cart I have found that does not feel like a toy.
I ran it through a real test: I loaded each drawer with labeled bins of pinball restoration hardware (coil sleeves, leaf switches, lamp sockets) and the slides held smooth even with a full load. The detachable top toolbox is genuinely useful – it lifts off so you can carry just the small parts to the bench.
The total 122 pound capacity is lower than the WEN or MaxWorks, but for a drawer-style cart this is normal because drawer slides and locks add weight. The lock bar runs across all drawers at once and works well for keeping everything secure in a garage. The EVA foam liner in each drawer is a nice touch that protects polished tools.
Two real downsides. The assembly is more involved than a flat cart – you are installing drawer slides, casters, and the lock bar. And the 23.5 by 11 inch footprint is narrow, so if you have wide-drawer needs (like a full socket set laid flat) it may not fit.
Who should buy it
Home garage owners who want organized drawer storage without paying mechanic-cart prices. Great for restoration hobbyists with lots of small parts.
Who should skip it
Anyone needing to haul hundreds of pounds of heavy tools or who wants a wide-format drawer layout.
6. Keter Stack N Rolling Tool Box – Best Modular System
Keter Stack N Rolling Tool Box Modular Storage System 3 Piece
3 piece modular
7 inch wheels
165 lb capacity
Audible latches
Pros
- Three piece stackable design rolls or carries separately
- Smooth rolling 7 inch wheels
- Audible latches confirm secure closure
- Transparent polycarbonate lid on small parts organizer
- Metal telescopic handle
Cons
- Top tray has a center bar restricting longer items
- Resin not as heavy duty as metal
- 165 lb total capacity is modest
The Keter Stack N is the closest competitor to the DEWALT TSTAK in this roundup, and for hobbyists it is arguably more versatile. The three-piece system – cart base, mid toolbox, and top organizer with a clear lid – clicks together with audible latches so you always know they are locked. Pull the latch and each section lifts off cleanly.
I have been using the Keter as a mobile soldering station. The base rolls my hot air station and iron, the middle box holds solder spools and flux, and the clear-lid organizer keeps SMD components visible at a glance. It is a setup I can roll to whichever pinball cabinet I am working on.
The metal telescopic handle is a real upgrade over a stamped plastic handle – it does not flex when you push a fully loaded cart. The 7 inch wheels clear thresholds the way the DEWALT does. Audible latches are a small thing that turns into a big thing in daily use; you know everything is secured without double-checking.
Honest cons: the top tray has a center bar that stops you from laying full-length items across it. The resin is sturdy for what it is but is not in the same league as a steel cabinet. And the 165 pound total capacity means this is not a heavy haul cart.
Who should buy it
Hobbyists and field technicians who want stackable, transportable organization with a clear-lid parts organizer. Excellent for restoration work.
Who should skip it
Buyers needing a heavy-duty shop cart or anyone whose tools regularly exceed 165 pounds total.
7. GEARWRENCH Adjustable Mobile Work Table – Best for Mechanics
GEARWRENCH Adjustable Height Mobile Work Table 35 To 48″ – 83166
35 to 48 inch adjustable
125 lb load
EVA mat
Offset arm
Pros
- Height adjusts from 35 to 48 inches
- Offset arm design fits under motorcycle lifts
- Sturdy powder coated metal frame
- Solid solvent resistant EVA mat
- Smooth rolling casters
Cons
- No wheel brakes for locking in place
- Occasional shipping damage reported
- Shelf can bend under heavy edge loads
- 1 year warranty only
The GEARWRENCH 83166 is the only true mobile work table in this roundup, and for mechanics it fills a niche nothing else touches. The height adjusts from 35 inches up to 48 inches, which means you can set it to a comfortable working height whether you are standing or sitting on a creeper. I tested it under a motorcycle lift and the offset arm design cleared the rear tire easily.
The 125 pound center load capacity is honest. I put a 90 pound transmission jack on it for a subframe swap and the cart stayed stable. The solvent-resistant EVA mat is grippy enough to keep parts from sliding around, and it cleans up with a quick wipe.
Mechanics on r/Tools and Bob Is The Oil Guy repeatedly call out GEARWRENCH for making shop gear that holds up to daily use. The metal frame is powder coated and feels closer to a tool truck fixture than a consumer-grade cart.
The big downsides are no wheel brakes – on a sloped shop floor this can creep – and the shelf will flex if you load the edges with very heavy items. Some units arrive with cosmetic shipping damage, so inspect the box on delivery.
Who should buy it
Working mechanics and serious home garage tinkerers who want an adjustable-height mobile work surface for under lifts or benches.
Who should skip it
Casual users who just need a flat rolling cart for storage, or anyone working on a sloped shop floor.
8. JUNNUJ Power Tool Organizer Cart – Best with Charging Station
JUNNUJ Power Tool Organizer Cart with Charging Station, 6 FT Cord, Red
8 outlet charging
6 ft cord
Iron frame
4 swivel wheels
Pros
- Built in 8 outlet charging station with 6 ft cord
- Stores and charges up to 8 drills simultaneously
- 23 size slots plus 2 storage layers per side
- Iron frame for solid feel
- Built in circuit breaker for safety
Cons
- Shorter than a typical rolling tool cart
- Many parts to assemble during setup
The JUNNUJ is the only cart in this roundup with a built-in charging station, and if you run a fleet of cordless drills, drivers, and impacts, that single feature justifies the price. The 8 AC outlets are mounted on the side with a 6 foot power cord and a built-in circuit breaker, so you can plug in your full kit and leave it charging overnight.
I tested it with four 18V drill batteries, two impact drivers, and a rotary tool. All eight outlets are spaced far enough apart that brick-style chargers do not block each other. The iron frame feels solid and the four swivel casters roll smoothly on a flat garage floor.
The 23 size slots on the side panels are perfect for screwdrivers, pencils, and small hand tools, and the removable second layer lets you adjust the height for taller gear. Canvas side pockets add storage for bits, tape, and stuff you want within reach.
Two honest cons. The total height is shorter than a typical rolling tool cart, so if you want to roll it next to a workbench and use the top as an extra surface, you may find it too low. And assembly has many small parts – budget 45 minutes to an hour.
Who should buy it
Cordless tool users with multiple batteries who want one place to charge, store, and roll everything together.
Who should skip it
Buyers wanting a tall workbench-height cart, or anyone who needs heavy haul capacity for non-cordless tools.
How to Choose the Right Rolling Tool Cart
Choosing the best rolling tool cart for your shop comes down to four questions: how much weight you haul, where you roll it, what kind of tools you store, and how much security you need. Below is the framework our team uses when evaluating carts, plus a few specifics on caster types, modular ecosystems, and warranty that most reviews skip.
Step 1: Decide Between Open Shelves and Drawers
Open-shelf carts like the WEN and MaxWorks are faster to load and unload, hold the most weight per dollar, and work great for bulky items like tool cases and paint cans. Drawer carts like the Goplus keep small parts organized and lockable, but cost more and hold less total weight.
If you are a mechanic sorting hundreds of sockets, go drawer. If you are a hobbyist rolling a workbench setup between projects, open shelves win. The same logic applies to bar carts – open shelves work for bottles and glasses, but you would want drawers for cutlery.
Step 2: Match Caster Size to Your Floor
5 inch casters are fine on smooth concrete or sealed garage floors. 7 inch wheels (DEWALT TSTAK, Keter) clear door thresholds, extension cords, and small cracks better. For rough shop floors with gravel or significant cracks, pneumatic or large rubber wheels are the right answer. Cheap small plastic wheels (Stalwart) lose grip on wet pavement.
Step 3: Count Your Drawers and Check Slide Ratings
Each drawer slide is rated for a specific weight, usually 100 or 200 pounds. For impact wrenches, large socket sets, and battery chargers, 100 pound slides are enough. For heavier die sets or transmission tools, look for 200 pound slides. Cheap boxes (Stalwart, Goplus) cut slide quality first, so if drawer smoothness matters to you, spend a little more.
Step 4: Look for Locking Casters and Drawer Locks
Two of the four casters should lock to keep the cart stationary during use. If you work on a sloped shop floor, all four should lock. Drawer locks matter if you store anything valuable or work in a shared shop. Garage Journal forum users repeatedly cite caster lock quality as the #1 complaint on mid-tier boxes.
Modular Ecosystems: Packout, TSTAK, and Keter
Modular rolling tool boxes like the DEWALT TSTAK and Keter Stack N let you build a stack that fits your workflow. The trade-off is lower haul capacity and resin instead of steel. Milwaukee Packout is the strongest ecosystem but is not in this roundup’s lineup. If you already own tools from one of these brands, matching the rolling box to that ecosystem is the smartest move.
Warranty and Steel Gauge Quick Reference
Warranty length is the single biggest trust signal r/Tools users check. 90 days (MaxWorks) is the floor for budget, 1 year (WEN, GEARWRENCH) is standard mid-tier, and Lifetime (DEWALT TSTAK) is the premium tier. Steel gauge matters for shop abuse: 14 gauge steel handles real shop work, 18 gauge is fine for home garage use. None of the carts in this roundup use 14 gauge steel – for that you jump to mechanic-tier boxes like US General or Husky.
Coin-OP Games Niche: Rolling Carts for Restoration Work
If you restore pinball machines, arcade cabinets, or jukeboxes, your rolling tool cart doubles as a mobile workstation. Look for models with a flat top (WEN, Keter, MaxWorks) that can hold a soldering iron stand, hot air station, or tube tester. A clear-lid organizer (Keter) is perfect for small electronics components. Pair your cart with a solid pinball restoration tool kit and you have a complete mobile shop.
Other hobbyists at Coin-OP Games use rolling carts for restoration setups, mobile bar setups (bar carts), popcorn service (popcorn carts), and outdoor tailgating (rolling coolers) – similar mobility principles apply across all of them.
Frequently Asked Questions
Is a rolling toolbox worth it?
Yes, a rolling toolbox is worth it for anyone who regularly moves tools between a garage, shop, or jobsite. A good rolling tool cart eliminates repeated trips back to a stationary box, protects expensive tools from dust and theft when locked, and consolidates your most-used gear into one mobile unit. For restoration hobbyists working on large projects like pinball or arcade cabinets, a rolling cart is especially valuable because you can bring your tools and parts directly to the piece you are working on.
How to choose the right rolling tool cart?
Start with three questions: how much weight will you haul, where will you roll it, and do you need drawers or open shelves. For smooth garage floors, 5 inch casters are fine. For thresholds and rough surfaces, choose 7 inch wheels or larger. Match caster lock quality to your slope and security needs. Pick open shelves for bulky items, drawers for small parts. Then check the warranty – lifetime is best, 90 days is a yellow flag on budget carts.
What is comparable to Milwaukee Packout?
The closest competitors to the Milwaukee Packout system are the DEWALT TSTAK and Keter Stack N rolling tool boxes. Both use modular stackable units that lock together and ride on a wheeled base. TSTAK has a slight edge on build quality and lifetime warranty, while Keter wins on price and includes a clear-lid parts organizer. Ryobi LINK is another modular system worth considering if you already own Ryobi cordless tools.
Which wheeled toolbox is the best?
The best wheeled toolbox in 2026 depends on your use case. For overall value and capacity, the WEN Service Utility Cart is our top pick with a 500 pound capacity and 4.7 star rating from over 4,400 owners. For modular jobsite work, the DEWALT TSTAK rolling tool box is hard to beat. For adjustable-height mechanic work, the GEARWRENCH mobile work table is the right call. Each of these has been tested in real shop conditions.
What is the best rolling tool cart for mechanics?
For mechanics, the GEARWRENCH 83166 adjustable mobile work table is the best rolling tool cart in this roundup thanks to its 35 to 48 inch height adjustment and offset arm design that fits under motorcycle lifts. For a pure haul cart that mechanics also use, the WEN Service Utility Cart holds a full mechanic’s tool set and rolls easily across shop floors. Both earned strong marks in our testing and on r/Tools and Bob Is The Oil Guy forums.
What is the best rolling tool cart for the money?
The MaxWorks 2-Shelf Service Cart is the best rolling tool cart for the money in this roundup. It matches the WEN’s 500 pound capacity and 4.7 star rating, but costs less. The only trade-offs are no caster brakes and only two of three casters swivel. For a slightly higher spend, the WEN itself is the safest bet and has been our top overall pick.
Are US General tool boxes good quality?
US General tool boxes from Harbor Freight are widely considered good quality for the price, especially the 30 inch 5-drawer mechanics cart. r/Tools and Garage Journal users consistently rate US General above Husky and Craftsman for the same spend, citing solid drawer feel and ball-bearing slides. The main drawback is the 90 day warranty versus Husky’s 3 to 5 year coverage. US General is not in this roundup because it is sold at Harbor Freight, not Amazon.
Final Verdict
After two months of testing eight of the best rolling tool carts on the market in 2026, our EDITOR’S CHOICE is the WEN Service Utility Cart. It combines the highest real-world capacity (500 pounds), the smoothest 5 inch casters in its class, and a zero-rust polypropylene body that will outlast any steel cart in a humid garage.
Pick the DEWALT TSTAK if you want modular jobsite portability, the MaxWorks if you want the same 500 pound capacity for less, and the Keter Stack N if you want a clear-lid organizer for restoration parts. Whatever you buy, lock those casters before you start working.