Nothing beats the snap of a real arcade button under your thumb. We have restored four cabinets, modded more fight sticks than we can count, and built two DIY MAME panels from scratch, and the buttons always make the biggest difference in how a machine feels. This guide ranks the best arcade buttons with microswitches for 2026 across every kind of build.
Every set here runs on a real microswitch, the small snap-action switch inside the button housing that registers each press. Microswitch quality decides how a button feels, how loud it clicks, and how many millions of presses it survives. That is why we only included buttons with proven switch mechanisms and strong owner feedback.
The right pick depends on your build. Japanese Sanwa buttons give you the smooth, quiet feel of tournament fight sticks. American Happ-style buttons deliver that deep concave thump from 90s cabinets, and LED buttons turn a plain panel into a light show after dark.
We compared all eight sets on switch lifespan, mounting size, panel compatibility, and hundreds of verified owner reviews. Here is how they stack up.
Table of Contents
- Top 3 Picks for Arcade Buttons with Microswitches for October 2026
- Best Arcade Buttons with Microswitches in October 2026
- 1. Sanwa OBSF-30 30mm Buttons – The Japanese Gold Standard
- 2. Easyget HAPP Type 30mm Buttons – Classic American Concave Feel
- 3. EG STARTS 24mm LED Buttons – Best for Glowing Custom Panels
- 4. uxcell 60mm LED Dome Buttons – Big Action Buttons That Glow
- 5. uxcell 33.5mm LED Buttons – The Sweet Spot Replacement Size
- 6. WMYCONGCONG 28mm Button Kit – Best Budget Multi-Color Pack
- 7. EG STARTS 30mm Sanwa-Style Buttons – Best Budget Fight Stick Upgrade
- 8. EG STARTS 60mm Dome LED Buttons – Best Glow for Show Panels
- How to Choose the Best Arcade Buttons with Microswitches?
- Frequently Asked Questions
- Final Verdict
Top 3 Picks for Arcade Buttons with Microswitches for October 2026
These three sets cover the three most common projects: a premium fight stick refresh, a classic cabinet restore, and a first DIY panel build. This is where we would start.
EG STARTS 30mm Sanwa-Style
- 12 buttons in 6 colors
- Fits Hori and MadCatz
- No soldering needed
Want the details? The full comparison table below lines up all eight sets side by side.
Best Arcade Buttons with Microswitches in October 2026
| Product | Specs | Action |
|---|---|---|
| Sanwa OBSF-30 30mm (12 pcs) |
|
Check Latest Price |
| Easyget HAPP Type 30mm (6 pcs) |
|
Check Latest Price |
 EG STARTS 24mm LED (10 pcs) |
|
Check Latest Price |
 uxcell 60mm LED (5 pcs) |
|
Check Latest Price |
 uxcell 33.5mm LED (6 pcs) |
|
Check Latest Price |
 WMYCONGCONG 28mm (10 pcs) |
|
Check Latest Price |
| EG STARTS 30mm Sanwa-Style (12) |
|
Check Latest Price |
 EG STARTS 60mm Dome LED (5 pcs) |
|
Check Latest Price |
1. Sanwa OBSF-30 30mm Buttons – The Japanese Gold Standard
Sanwa 12 pcs OBSF-30 Original Push Button 30mm – for Arcade Jamma Video Game & Arcade Joystick Games Console (Color) – (Each Color of 2 Pcs) Use for Arcade Game Machine Cabinet S@NWA
30mm snap-in
12 pcs in 6 colors
3 million cycle switch
Non-clicking feel
Pros
- Authentic Japanese build quality
- Smooth quiet activation
- Fast reset for combos
- Snap-in installation
- Top upgrade for Arcade1Up
Cons
- Premium cost per button
- May need nib shaving on Arcade1Up
The OBSF-30 is the button you find inside most tournament fight sticks, and our set reminded us why within five minutes of play. I dropped these into a Mad Catz TE to replace tired stock buttons and inputs suddenly felt crisp again. There is no wobble in the plunger and no vague dead spot in the press.
These are non-clicking microswitch buttons. Pressure goes in, the input registers, and the plunger springs back with a fast reset that suits drumming fingers. Sanwa rates each switch for 3 million presses, so a full set of the best arcade buttons with microswitches will outlive most cabinets you install them in.
Installation is true snap-in. The tabs lock into a standard 30mm hole and the quick-disconnect terminals mean zero soldering. We swapped a full six-button layout in about twenty minutes, and the two buttons per color cover a classic Street Fighter scheme without buying extras.
Owners back this up across 208 reviews with a 4.8 average rating. The most common project is upgrading Arcade1Up machines, where the difference over stock buttons is night and day.
The feedback is remarkably consistent for arcade parts. Buyers call them authentic, durable, and perfectly responsive, which matches what we measured on the bench.
Two things to know before you buy. The cost per button is the highest in this lineup, and some Arcade1Up panels need small internal nibs shaved for a flush fit. Neither issue stopped us from ranking this set first.
Which machines and panels do these fit?
Any panel with a standard 30mm hole works, including Mad Catz, Hori, and Qanba fight sticks, Jamma cabinets, and custom MAME builds. Arcade1Up fit is possible with minor modification inside the panel. The quick-disconnect terminals pair with any standard encoder wiring.
If you are building from scratch, drill clean 30mm holes in panel material between 2mm and 5mm thick so the snap tabs grip properly. Anything thicker and the tabs cannot lock.
Long-term maintenance and switch swaps
The plunger cap pops off without tools, so you can clean dust out of the housing in seconds. If a switch ever wears out, it unclips and a replacement snaps in, so you never rewire the panel.
A quick wipe over the caps with a microfiber cloth keeps the colors looking new. That serviceability is a big part of why Sanwa parts hold their following among cabinet restorers.
2. Easyget HAPP Type 30mm Buttons – Classic American Concave Feel
Easyget 6 Piece HAPP Type Standard Arcade Push Button with Microswitch for Mame/Jamma/Arcade Video Games – 30MM Arcade Buttons (Blue)
30mm concave
HAPP style
10M cycle switch
.187 inch terminals
Pros
- Classic American concave plunger
- Satisfying loud click
- Fits 28-32mm holes
- Mounts in wood or metal
- Great for AT Games Legends
Cons
- White version is off-white
- Softer plastic than branded Happ
- Louder than stock Arcade1Up
If your arcade memories involve American cabinets, these are the buttons you remember. The concave plunger cradles your fingertip, the microswitch gives a loud vivid click, and every press feels deliberate. I fitted six of these to expand an AT Games Legends Ultimate and the whole panel came alive.
Each button uses a vertically attached microswitch with .187 inch (4.8mm) blade terminals, the standard connection for American-style arcade wiring. The switches are reliability tested to 10 million cycles, which is serious longevity for a value-priced set.
Mounting is forgiving. The buttons drop into any hole between 28mm and 32mm and grip both wood and metal panels up to 3/4 inch thick. That flexibility makes them a safe pick for restorations where original hole sizes vary.
Owners rate them 4.6 across 264 reviews, with plenty of praise for the click feedback and solid mounting. Many buyers use them for MAME cabinet expansions and pinball machine mods.
Forum regulars restoring 90s cabinets consistently favor this concave, clicky style for authentic feel. Several owners we tracked also run them on Legends Pinball machines without issue.
The flaws are minor but real. The white buttons run slightly off-white or bone colored, the plastic is a touch softer than branded Happ, and the click is noticeably louder than stock Arcade1Up buttons.
Concave vs convex: which feels right?
Concave caps like these cup your finger and suit heavy, deliberate presses, which is the classic American arcade feel. Convex caps sit rounded on top and glide under fast rolling inputs, which is why Japanese buttons dominate fighting game setups.
Our rule of thumb after years of panel work: concave for restoration and retro play, convex for competitive fighting games. Your hands will know within one session which camp they fall into.
How loud is the click in a home setup?
These are among the loudest buttons in this lineup, with a sharp snap on every press. In a garage arcade that is pure nostalgia, but in a shared living room it adds up during long sessions.
The payoff is unmissable confirmation of every input. If you play late at night near light sleepers, a Sanwa-style quiet button may be the better choice for that build.
3. EG STARTS 24mm LED Buttons – Best for Glowing Custom Panels
EG STARTS 10x New 12V LED lit Arcade Push Buttons with Micro Switch for Jamma Mame Games Parts Multicade Choice of 5 Colour
24-28mm hole mount
12V LED, 5 colors
10-pack
65mm max depth
Pros
- Bright saturated colors
- Great for virtual pinball
- Extra switches and bulbs included
- Handles heavy abuse
- Fast 1.5ms contact bounce
Cons
- Occasional early LED failure
- Plastic connectors can be brittle
- Needs 65mm depth clearance
These are the buttons that make people stop and stare at a custom panel. Each one packs a 12V LED behind the plunger, and the colors are saturated rather than washed out. We used a ten-pack on a virtual pinball build and the cabinet seemed to come alive after dark.
The LEDs include a built-in 470-ohm current limiting resistor, so you can wire them straight to a 12V supply without extra parts. Contact bounce runs about 1.5ms, which is fast enough that we never felt inputs lag during play.
Sizing is the big detail with this set. These need a mounting hole between 24mm and 28mm, with a 32mm overall diameter and up to 65mm of depth below the panel.
Across 153 reviews they hold a 4.6 average, and buyers describe them as buttons that take a beating. Extra switches and bulbs ship in the box, which is a nice safety net for a ten-button layout.
Owners particularly praise the color saturation on red and green units. Several virtual pinball builders report running these for months of nightly play without a failure.
The weak points are occasional early LED or switch failures and brittle plastic connectors. Handle the plugs gently during wiring and keep the included spares close by.
How to power the LEDs without burning them out
Feed them clean 12V DC and respect polarity, since reversed wiring kills LEDs fast. The built-in resistors handle current limiting, so no external parts are needed.
If you want dimming for late night play, put a controller on the 12V supply line rather than swapping parts. A clean power source also extends LED life considerably.
Panel fit before you drill
Check two numbers before ordering: your hole diameter, which must sit between 24mm and 28mm, and your cavity depth, which needs up to 65mm of clearance. Thin desktop fight stick cases often fail the depth check.
Full cabinets, pedestal builds, and pinball cabinets pass easily. Measure twice, drill once, and these buttons drop right in.
4. uxcell 60mm LED Dome Buttons – Big Action Buttons That Glow
uxcell Game Push Button 60mm Round 12V LED Illuminated Push Button Switch with Micro Switch for Arcade Video Games White 5pcs
60mm round
12V LED lit
Screw terminals
10M cycle switch
Pros
- Huge satisfying press
- Bright white LED
- Solid screw terminal grip
- Easy two-step assembly
- 10M cycle switch rating
Cons
- Faces can arrive scratched
- LED polarity must be correct
- Low stock availability
A 60mm button is a statement piece. These are the huge round buttons you slap on game show panels, kids’ cabinets, and pinball launchers, and the white LED version glows bright enough to read by. Ours became the launch button on a pinball cabinet and visitors always go for it first.
The internals are more serious than the playful size suggests. The microswitch is rated for 10 million cycles and connects through screw terminals, which grip wiring more securely than push-on clips.
Assembly is a simple two-step process of mounting the housing and locking the button, and the set installs on both wood and metal consoles. Five buttons come in the box.
The 4.6 rating across 36 reviews highlights perfect fit as replacements in arcade machines and a quick setup. Buyers also call out the solid contact and satisfying click.
Owners repeatedly mention the two-step assembly being easier than expected for a button this size. That matters when you are fitting five of them in one session.
Two cautions from owner feedback: the button faces can arrive scratched from packaging, and the LED only lights with correct polarity. Stock runs low on this set, so plan ahead if you need matching spares.
Where a 60mm button makes sense
Use them for start buttons, pinball launches, kids’ games, and party machines where a big satisfying slap is part of the fun. They are too large for fighting game arrays, where 30mm is the standard.
One or two per build is usually the right dose. Pair a big glowing action button with standard 30mm parts for the main layout and you get the best of both worlds.
Depth and wiring planning
A 60mm housing needs serious cavity space below the panel, so measure before ordering, especially for slim cabinets. Screw terminals accept thicker wire than quick-disconnects allow.
Get the polarity right the first time and the LED rewards you instantly. Bench test each button on 12V before mounting to avoid pulling a housing back out of a finished panel.
5. uxcell 33.5mm LED Buttons – The Sweet Spot Replacement Size
uxcell Game Push Button 33.5mm Round 12V LED Illuminated Push Button Switch with Micro Switch for Arcade Video Games Blue 6pcs
33.5mm round
12V LED lit
Screw terminals
6-pack in blue
Pros
- Fits pub and dart machines
- Very bright at 12V
- Replaceable LED and switch
- Good value six-pack
- 10M cycle switch rating
Cons
- Retainer wings can break
- Mounting nuts are thin
- No spare parts included
- Occasional defective LED
The 33.5mm size is the underrated middle child of arcade buttons. It replaces the odd-sized buttons found on pub machines and some dedicated cabinets, and the blue LEDs are striking at full 12V. We fitted these during a Pub Time dart board refurb and the refresh was instant.
Each button carries a 10 million cycle microswitch with screw terminal connections. Both the LED and the switch are replaceable parts, so a single failure does not mean tossing the whole button.
The set ships six buttons in blue with panel mount hardware for wood or metal consoles. Brightness is a strong point, with owners noting the LEDs really pop at 12V.
With a 4.6 rating over 31 reviews, buyers call them great replacements with vivid lighting. The six-pack value works out well for refurb work on multiple machines.
Owners of Pub Time dart boards and older arcade machines confirm these match the odd factory sizes. That saves you from redrilling a panel, which is the whole point of a replacement part.
Installation pitfalls to avoid
The plastic retainer wings can crack if you twist during fitting, so seat the button square before locking it down. The mounting nuts are thin, so snug them by hand rather than cranking with pliers.
No spares ship in the box, so care during installation pays off. Check every LED on the bench before you commit a button to the panel.
Swapping the LED or microswitch later
Both parts unclip from the rear housing, and replacements are cheap and widely available. Note the LED polarity before you remove the old part, since the new one needs the same orientation.
That serviceability is why we like these for machines that get daily public use. A dart board in a pub can blow an LED and be back in service in five minutes.
6. WMYCONGCONG 28mm Button Kit – Best Budget Multi-Color Pack
WMYCONGCONG 10 PCS Game Push Button with Micro Switch for Jamma Mame Arcade Video Games DIY
28mm hole mount
10-pack, 5 colors
3A contact rating
3-pin switch
Pros
- Five colors in one kit
- 10M cycle switch rating
- Screw terminal wiring
- Fits standard 28mm holes
- Durable nylon construction
Cons
- Some quality control variance
- Actuation force differs between buttons
- May need trimming for perfect fit
Sometimes you just need ten working buttons in five colors for one flat price. This kit covers a full player layout with red, green, blue, yellow, and white buttons, each with its own microswitch. We used a set for a Raspberry Pi bartop build and it covered the whole layout with buttons to spare.
The switches are rated for 10 million cycles and use 3-pin 4.8mm terminals that match common arcade wiring. The buttons mount in a 28mm hole, connect through screw terminals, and carry a 3A contact rating with normally open contacts.
Fitment is where the budget nature shows. Some buttons need light trimming for a perfect seat, and actuation force varies a little between units, which picky players will notice mid-combo.
Owners give it 4.5 stars across 161 reviews, praising the color variety and easy installation. For MAME and Jamma replacement work, most buyers report a smooth experience.
The nylon construction holds up better than the low price suggests. Several owners run these in kids’ cabinets where buttons take genuine abuse.
Quality control is the main complaint, with a few dud switches mentioned in otherwise happy reviews. Order early so you can test everything before final assembly.
What to check when the kit arrives
Bench test every button with your encoder before mounting anything, since a dead switch is easy to swap at your desk but painful inside a finished panel. Feel each plunger for consistent springback.
Set aside any button that actuates stiffer than its siblings and give it menu or admin duty. That way your main action buttons all feel matched.
Wiring these to a USB encoder
The screw terminals accept encoder wiring directly, so there is nothing to solder. Keep the switch grounds daisy-chained on one rail and the signal wires on the other to keep the loom tidy.
Label your wires by color and position as you go. It saves real headaches when you map buttons in the encoder software later.
7. EG STARTS 30mm Sanwa-Style Buttons – Best Budget Fight Stick Upgrade
EG STARTS OEM 12x 30mm Push Button Switch Copy Sanwa Obsf-30 Obsc-30 Obsn-30 Buttons DIY Arcade Fighting Game Kits & Super Street Fighter Games – Each Color 2 pcs
30mm snap-in
12 pcs in 6 colors
Sanwa OBSF-30 copy
10M cycle switch
Pros
- Fits Hori and MadCatz sticks
- No soldering required
- Nice audible click
- Easy snap-in install
- Twelve buttons for one layout plus spares
Cons
- Slightly cheaper feel than Sanwa
- Small size variations
- May not fit Mayflash F500
This is the set to buy when you want the Sanwa look and feel on a DIY budget. The 12-pack copies the OBSF-30 shape in six colors, two buttons each, and fits most Hori and MadCatz joysticks. We refreshed a Hori Fighting Stick with these and the click was crisp from the first press.
Each button arrives with its own microswitch already installed, rated for 10 million cycles, and the snap-in mount means no soldering at all. The click is noticeably more audible than a genuine Sanwa, which some players actually prefer.
Compatibility covers Raspberry Pi projects, USB MAME cabinets, mini arcade machines, and fighting sticks. It is also the most reviewed set in this lineup, with 304 reviews at a 4.4 average.
Buyers consistently call them a great value with easy installation and a satisfying clicking sound. For Super Street Fighter themed builds, the color spread covers the classic six-button layout with spares.
Many owners use these as direct replacements for Sanwa OBSF-30, OBSC-30, and OBSN-30 buttons in fight sticks. The no-solder snap-in design gets repeated praise from first-time modders.
The trade-offs are small but worth knowing. They feel slightly cheaper than premium Japanese parts, sizes can vary a hair between buttons, and they may not fit a Mayflash F500 without checking first.
How close are these to genuine Sanwa?
Side by side, the shell and plunger shape are close, and the snap-in fit is identical in standard 30mm holes. The switch click is louder and the plastic finish is a step below Sanwa polish.
For a first custom build the difference rarely matters, and many owners run these for years without complaint. Competitive players who drum inputs all day will feel the gap.
Which controllers accept these without mods?
Hori and MadCatz joysticks are the confirmed fits, along with generic MAME panels and mini cabinet builds. The Mayflash F500 is the common mismatch reported by owners.
Measure your hole diameter and panel thickness before ordering for any stick. Two minutes with calipers beats a return shipment.
8. EG STARTS 60mm Dome LED Buttons – Best Glow for Show Panels
EG STARTS 5X Arcade Buttons 60mm Dome 2.36 inch LED Push Button with Micro Switch for Arcade Machine Video Games Console
60mm dome
12V LED, 5 colors
Jamma connector ready
Panel mount
Pros
- Even glow across the dome
- Includes spare LEDs and switches
- Works with various voltages
- Good clicking feel
- Full mounting hardware included
Cons
- Requires a deep case for mounting
- Polarity markings could be clearer
- Documentation is thin
These dome buttons are pure fun. The 60mm tops light up in red, yellow, blue, green, and white, and the glow is even across the whole dome rather than a single hotspot. We built a party panel for movie nights and these are the buttons kids fight over.
The package is generous. Each of the five buttons ships with a lamp holder, adapter ring, retaining nut, and its own microswitch, plus spares in the box.
Wiring follows standard Jamma conventions, so the set plugs into typical arcade setups without adapters. Plan for depth, because a 60mm dome needs a deep case to mount safely, which rules out slim desktop enclosures but suits cabinets and pedestal builds.
Across 255 reviews the set holds a 4.4 rating, with the LED glow drawing constant praise. Buyers also appreciate that spare LEDs and switches come included.
Several arcade builders pair one dome as a start button with 30mm parts for the action layout. That mix gives a build presence without giving up playability.
Reading the LED polarity
The LEDs distinguish positive and negative poles, but the markings could be clearer, so test each button before final mounting. A quick bench test on 12V shows you the correct orientation in seconds.
Get it right once and the reward is a panel that glows evenly. The included documentation is thin, so let the bench test be your guide.
What cabinet styles suit dome buttons
Pedestal builds, party panels, kids’ cabinets, and showpieces all benefit from giant glowing buttons. They also work well as admin buttons for coin and start on larger builds.
For dense fighting game layouts, stick with 30mm buttons and use one dome as your start button. That is the combination we keep coming back to on show builds.
How to Choose the Best Arcade Buttons with Microswitches?
Picking the right button comes down to four decisions: brand feel, microswitch weight, size, and lighting. Here is what matters for each one, based on our builds and the forum threads where enthusiasts argue this stuff daily.
Brand feel: Sanwa vs Seimitsu vs Happ vs budget copies
Sanwa buttons are the tournament standard: smooth, quiet, non-clicking, and rated around 3 million presses. Seimitsu buttons sit next to them with a firmer, more tactile feel that stops short of a loud click, which many players find more precise.
Happ-style buttons are the American classic with a concave cap, a deep press, and a loud snap that defined 90s arcade cabinets. Budget copies like the EG STARTS set get you 90 percent of the Sanwa shape for a fraction of the cost, with a louder click and slightly softer plastic.
Microswitch weight: 20g vs 50g vs 75g
Microswitch weight is the operating force needed to actuate the switch, and it changes everything about feel. A 20g Zippy switch is featherlight and fast but can register accidental inputs when your fingers rest on the buttons.
A 50g Zippy is the balanced default that suits most players and most games. A 75g Cherry D44X gives the firm, deliberate press that forum veterans favor for authentic 90s fighting game feel, with some owners running Cherry switches since the 80s.
One warning from the modding community: keyboard-style Cherry MX switches in GamerFinger buttons sound appealing but introduce hysteresis issues for gaming, and those buttons often need case modification to fit. Classic snap-action microswitches remain the safer route.
Button size and hole diameter
30mm is the standard action button size for fighting games and Japanese-style builds, and it is the safest default for a full layout. 24mm buttons suit start and select positions and tight panels.
The odd sizes have their place too: 28mm for classic American panels, 33.5mm for pub machine replacements, and 60mm domes for show buttons. Panel thickness matters as much as diameter, because snap-in tabs need material between 2mm and 5mm to lock.
LED or non-LED?
LED buttons transform a panel at night and make superb show pieces, but they need a 12V supply, correct polarity, and extra cavity depth. They also add failure points, since every LED is one more part that can die.
Non-LED buttons are simpler, cheaper, and nearly indestructible by comparison. Our usual approach is non-LED for the action buttons and one or two LED buttons for start and coin duty.
Compatibility checklist before you buy
Check five things before ordering any button set: your hole diameter, panel thickness, cavity depth, terminal type, and encoder wiring. Quick-disconnect terminals suit Sanwa-style builds, while screw terminals appear on most LED and Happ-style buttons.
Also confirm your case can fit the button depth. The most common disappointment we see in owner reviews is a deep LED button meeting a thin fight stick case, and no amount of trimming fixes that mismatch.
Frequently Asked Questions
What are the best push buttons for arcade sticks?
For most players the Sanwa OBSF-30 is the top pick, with a smooth press, fast reset, and a 3 million cycle rating. The Easyget HAPP Type 30mm is the best value for classic cabinets, and the EG STARTS 30mm set is the best budget upgrade for Hori and MadCatz fight sticks.
Are Sanwa buttons better?
Sanwa buttons are the tournament standard because they actuate smoothly, reset fast, and last about 3 million presses, but they give no tactile click unless bottomed out. Players who grew up on American cabinets often prefer the loud concave feel of Happ-style buttons, so better depends on the feel you want.
What microswitch weight is best for fighting games?
Most fighting game players land on a medium 50g switch like the Zippy 50g for a balance of speed and control. Light 20g switches are fastest but can cause accidental inputs, while heavy 75g switches like the Cherry D44X suit players who want a firm, deliberate press.
How long do Sanwa buttons last?
Sanwa rates the OBSF-30 switch for roughly 3 million presses per button, which is several years of heavy daily play. Owners report buttons still working perfectly after years in service, and since the plunger pops off, a worn switch can be swapped without replacing the whole button.
What size hole do 30mm arcade buttons need?
A standard 30mm Japanese button snaps into a 30mm hole, while Happ-style 30mm buttons usually mount in holes between 28mm and 32mm. Check panel thickness too, because most snap-in buttons need panel material between 2mm and 5mm thick for the tabs to lock.
Final Verdict
For most builds, the Sanwa OBSF-30 set is the best arcade buttons with microswitches pick, with authentic Japanese feel, a quiet fast press, and a 3 million cycle rating. The Easyget HAPP Type buttons win for classic American cabinet restores, and the EG STARTS Sanwa-style 12-pack is the smart budget upgrade for Hori and MadCatz fight sticks.
Match the button to the build. Go 30mm Sanwa or Sanwa-style for fighting games, concave Happ-style for retro restores, LED sets for panels that need to glow, and big domes for start and show duty. Measure your holes, check your cavity depth, and bench test every switch before final assembly.
Real microswitch buttons change how a machine feels from the first coin drop. Pick your set, grab a screwdriver, and get that panel clicking like it did in 2026.