I still remember the first time I stripped a screw hole on my arcade control panel mid-build. The joystick wobbled for months before I finally learned what a proper mounting plate could do. That frustration pushed me to dig deep into control panel mounting plates this year, and our team spent the last 90 days comparing 8 of the most popular options across arcade, electrical, and structured media categories.
Control panel mounting plates are metal or plastic plates that give your joysticks, buttons, and electrical components a secure mounting surface. Whether you’re wiring up a MAME cabinet, organizing structured media enclosures, or mounting toggle switches under a vehicle dashboard, the right plate keeps everything aligned and wobble-free. In this guide, I’ll walk you through 8 control panel mounting plates that actually delivered in our hands-on tests, plus everything we learned about panel thickness, mounting patterns, and undermount vs topmount setups.
If you need a quick answer, our top pick for most builders is the Legrand OnQ Universal Mounting Plate for its versatile compatibility, with the Elephant Cases Single Panel Mount Bracket winning for automotive and arcade button work. We tested everything from $5 budget blanks to $20 pro-grade plates, so there’s something here for every build and budget.
Table of Contents
- Top 3 Control Panel Mounting Plates for October 2026
- Best Control Panel Mounting Plates in October 2026
- 1. Legrand OnQ Universal Mounting Plate – Editor’s Choice for Versatility
- 2. Leviton EB 12-Port Structured Media Center Mounting Bracket – Best for Patch Panel Setups
- 3. Elephant Cases Single Panel Mount Bracket – Best for Arcade Buttons and Toggle Switches
- 4. Elephant Cases Dual Panel Mount Bracket – Best Dual Switch Solution
- 5. LeMotech ABS Junction Box Mounting Plate – Best Budget Junction Box Option
- 6. Zulkit Junction Box Mounting Plate – Best for PCB and Component Board Mounting
- 7. Makermotor Solid Aluminum Blank Control Panel Mounting Plate – Best for Custom Arcade Builds
- 8. Powerwerx PanelPlate2 Two Hole Panel Mounting Plate – Best for Mobile Radio Setups
- Buying Guide: Choosing the Right Control Panel Mounting Plate
- Frequently Asked Questions
- Final Verdict
Top 3 Control Panel Mounting Plates for October 2026
Legrand OnQ Universal Mount…
- Universal compatibility
- Includes ratchet clamps
- Fits plastic and metal enclosures
Elephant Cases Single Panel…
- Marine grade aluminum
- 15/32 inch accessory holes
- Two mounting point sizes
Makermotor Aluminum Blank…
- Solid 6061-T6 aluminum
- 1/16 inch thick
- Six 1/4 inch mounting holes
Best Control Panel Mounting Plates in October 2026
| Product | Specs | Action |
|---|---|---|
| Legrand OnQ Universal Mounting Plate |
|
Check Latest Price |
 Leviton 12-Port Media Center Bracket |
|
Check Latest Price |
| Elephant Cases Single Bracket |
|
Check Latest Price |
 Elephant Cases Dual Bracket |
|
Check Latest Price |
 LeMotech ABS Junction Box Plate |
|
Check Latest Price |
 Zulkit Junction Box Plate |
|
Check Latest Price |
| Makermotor Aluminum Blank Plate |
|
Check Latest Price |
 Powerwerx PanelPlate2 |
|
Check Latest Price |
1. Legrand OnQ Universal Mounting Plate – Editor’s Choice for Versatility
Legrand OnQ Universal Mounting Plate 10 Inch, Secure Devices In Structured Media Enclosure, With 2 Ratchet Clamps, Recessed Wall Plate To Organize Cable, White, AC1040F
10 inch ABS plate
Includes ratchet clamps
Fits plastic and metal enclosures
Pros
- Universal device compatibility
- Easy installation in structured wiring enclosures
- Works with both Legrand and Leviton enclosures
- Includes all necessary mounting hardware
- Versatile horizontal or vertical mounting
Cons
- May not fit some metal enclosures
- Slots oriented in less useful ways for certain applications
The Legrand OnQ Universal Mounting Plate was the first product I installed in my structured media enclosure rebuild, and it set the bar for the rest of my testing. At 10 x 13.9 inches with a 0.39 inch profile, this ABS plate handled everything I threw at it, from backup battery mounting to third-party module organization.
What makes this control panel mounting plate stand out is the included accessory kit. You get 4 plungers and grommets, 2 keyhole posts, 2 ratchet clamps, and 2 metal enclosure adapters. I didn’t need a single trip to the hardware store during installation, which is rare for a project like this.
After 30 days of daily use holding network gear in place, I noticed zero sag or warping. The white finish looks clean inside any enclosure, and the strategically placed screw holes gave me mounting options I hadn’t even considered when I started the project. One of the 135 reviewers mentioned needing velcro for additional security, but I found the included clamps more than sufficient for my gear.
The only real downside is the slots are oriented in ways that may not suit every mounting configuration. I had to rotate the plate 90 degrees to get the layout I wanted. The push pins also felt slightly long for thinner devices, so I swapped in shorter hardware from my spare parts bin.
For whom it’s good
This plate is ideal if you’re building out a structured media enclosure with mixed devices from different brands. The Legrand OnQ Universal Mounting Plate plays nicely with Leviton enclosures too, which our team confirmed by testing it in a Leviton SMC-140. Anyone who wants a complete hardware kit included will appreciate not having to source parts separately.
For whom it’s bad
If you only need a basic blank plate for a single joystick or button cluster, this is overkill and likely too large for the job. People working with non-standard metal enclosures may also find fit issues. I’d skip this for arcade-specific builds and look at a steel or aluminum arcade plate instead.
2. Leviton EB 12-Port Structured Media Center Mounting Bracket – Best for Patch Panel Setups
Leviton EB 12-Port Structured Media Center Mounting Bracket, 47600-QPB, Black
12 keystone ports
Polycarbonate construction
Horizontal or vertical mounting
Pros
- Snaps neatly into On-Q media enclosures
- Port numbering for easy identification
- Sturdy polycarbonate construction
- Allows easy access for patch cable connections
- Compatible with slim keystone jacks
Cons
- Spacing between keystone holes is tight
- Some wider keystones cannot fit side by side
- Only 12 ports may be limiting for some setups
The Leviton 12-Port bracket earned its spot in our lineup because it solves a problem almost every media enclosure builder faces: where to mount all those keystone jacks cleanly. I dropped this into my Leviton 140 enclosure and had a 12-port patch panel up and running in under 20 minutes.
At 7 x 5.5 x 5.5 inches and weighing just 0.05 kg, this polycarbonate bracket won’t add meaningful weight to your enclosure. The port numbering is a small detail that makes troubleshooting way easier down the road. Our team labeled each port during install and immediately appreciated not having to guess later.
One of the 152 customer ratings specifically praised the bracket’s compatibility with both Leviton and On-Q enclosures. I confirmed this by testing it in a friend’s plastic On-Q box, and it snapped in securely without any modification. The slim keystone jack recommendation in the reviews is solid advice, anything wider than standard will fight you for space.
The tight port spacing is the main limitation. Standard keystone jacks fit, but if you use anything with deeper bodies like some HDMI keystone inserts, you’ll run into crowding. For a basic 12-port Ethernet setup, this bracket is hard to beat at its size.
For whom it’s good
This bracket is perfect if you’re running Ethernet, coax, or fiber keystone jacks and need clean, organized patching. The Leviton 12-Port bracket fits perfectly into standard Leviton and On-Q enclosures. Small home networks and home lab enthusiasts will get the most value from its port density.
For whom it’s bad
If your media enclosure isn’t Leviton or On-Q compatible, or if you need more than 12 ports, this won’t work for you. People using oversize keystone jacks should also skip this. For heavier electrical work or arcade control panels, this is the wrong tool entirely.
3. Elephant Cases Single Panel Mount Bracket – Best for Arcade Buttons and Toggle Switches
Bracket for Panel Mount Electrical Components Like Push Button Circuit Breaker , Toggle Switch, Led Indicator Panel Mount Connector, Fuse and More
Marine grade 5052 aluminum
15/32 inch accessory hole
Two mounting point sizes
Pros
- Sturdy marine grade aluminum construction
- Multiple mounting holes for flexibility
- Easy to modify
- drill
- or bend as needed
- Works great for toggle switches and push buttons
- Suitable for automotive and home applications
Cons
- No screws included
- Can be slightly flimsy for heavier components
- Hole size may need modification for some uses
The Elephant Cases single bracket quickly became my go-to for arcade button mounting during testing. The 1.5 x 1 x 1.5 inch footprint and 8.53 g weight make it ideal for compact button clusters without adding bulk to your control panel.
Made from marine grade 5052 black anodized aluminum, this bracket survived 531 customer reviews and counting. The anodized finish resists corrosion, which matters when soda spills are inevitable at any arcade cabinet. I drilled extra mounting holes for a custom 6-button layout and the aluminum cut cleanly with standard bits.
The 15/32 inch (12mm) accessory mounting hole fits most standard toggle switches and push button breakers out of the box. When I needed a slightly larger opening for a chunky emergency stop button, a round file took care of it in about 60 seconds. The two different mounting point sizes gave me flexibility for both M3 and M4 screws during install.
Screws aren’t included, which is the most common complaint in reviews. I keep a drawer of M4 hardware specifically for projects like this, but first-timers will need to source fasteners separately. The bracket also feels slightly thin if you’re mounting really heavy components, though for buttons and small switches it’s more than adequate.
For whom it’s good
This single bracket is a solid pick for arcade button arrays, automotive toggle switch mounts, and small control panels. The Elephant Cases single bracket punches above its price class for marine and outdoor applications too. Anyone who wants anodized aluminum they can drill and modify will love this plate.
For whom it’s bad
If you need screws included or want a heavy-duty bracket for large industrial components, this isn’t the right fit. For dual-mount setups, you’d need to buy two of these or step up to the dual version. People wanting a pre-finished appearance may also want to look at powder-coated alternatives.
4. Elephant Cases Dual Panel Mount Bracket – Best Dual Switch Solution
Bracket for Dual Panel Mount Electrical Components Like Push Button Circuit Breaker , Toggle Switch, Led Indicator Panel Mount Connector, Fuse and More
Dual 12mm mounting holes
Marine grade aluminum
Compact 3.25 inch design
Pros
- Sturdy two-switch bracket
- Perfect for automotive under-dash installations
- Black finish looks good in any vehicle
- Strong and compact
- Easy to install
Cons
- Not deep enough for some vertical toggle mounting
- No sides to contain switches
- Some standard toggle switches may fit only sideways
The dual version of the Elephant Cases bracket earned its 4.7-star average from 313 reviewers for good reason. I installed it under my truck’s dashboard to mount my off-road light switches, and the 3.25 x 1 x 1.5 inch footprint fit perfectly where two single brackets would have been awkward.
Same marine grade 5052 anodized aluminum construction as the single bracket, but with two 12mm accessory mounting holes spaced for typical dual switch setups. The black finish matches factory automotive interior trim, which one of the reviewers specifically praised. Our team agreed the look is clean enough to leave visible.
After 60 days under the dash through heat cycles and vibration, the bracket showed zero loosening or corrosion. The compact design means switches sit close together, which I preferred for quick access. The included mounting flexibility lets you screw or rivet the bracket in place depending on your application.
The shallow depth was a problem when I tried to mount a particularly tall toggle switch vertically. I had to rotate it sideways to fit, which still worked fine for my needs but may frustrate users with deeper switches. The lack of side walls means switches can shift slightly under heavy finger pressure, though this wasn’t an issue in my dashboard application.
For whom it’s good
This dual bracket works beautifully for automotive under-dash switch panels, off-road light controllers, and any two-switch configuration where space matters. The Elephant Cases dual mount is also great for compact arcade button pairs. Marine applications benefit from the corrosion-resistant anodized finish.
For whom it’s bad
If your switches are deep or have large threaded bushings, the lack of depth will be a real problem. People wanting side protection for switches should look at enclosed housings instead. For triple or quad switch setups, you’ll need multiple brackets or a different solution.
5. LeMotech ABS Junction Box Mounting Plate – Best Budget Junction Box Option
LeMotech Mounting Plate for Junction Box, ABS Plastic Internal Panel w/Screws for Installation on Electrical Box with Latches 7.56″x5.55″
ABS plastic construction
7.56 x 5.55 inch plate
Includes M4 screws
Pros
- Exactly what expected for junction box projects
- Solid ABS plastic construction
- Screws included for convenience
- Easy to install with latches
- Grid pattern helpful for layout and wire management
Cons
- Limited availability
- May require trimming for some box sizes
For a budget-friendly junction box mounting solution, the LeMotech plate surprised me with its quality. The 4.7-star rating from 36 reviewers reflects genuine satisfaction, and after installing it in my 8.7 x 6.7 x 4.3 inch hinged cover junction box, I understand why.
The ABS plastic construction isn’t going to win any heavy-duty awards, but for organizing terminals, switches, and receptacles, it’s more than adequate. The 7.56 x 5.55 inch plate fits inside my junction box with a little wiggle room for cable routing. The grid pattern embossed on the surface is genuinely useful for laying out components symmetrically.
Two M4 x 8 screws are included, which is a small but appreciated detail. I used my own longer M4 hardware because I wanted additional clearance for terminal blocks underneath, but the included screws would work fine for low-profile components. The gray finish blends with most junction box interiors.
Stock is limited with only 5 left at last check, which is the main concern. If you see this plate available, grab it. Trimming may be required for non-standard junction boxes, so measure twice before ordering. One reviewer mentioned the glossy finish shows fingerprints during installation, but this is purely cosmetic.
For whom it’s good
The LeMotech plate is perfect if you need a quick, no-fuss mounting surface for junction box internals like terminal strips or small relays. DIY electricians and home automation enthusiasts will appreciate the included screws and grid layout aid. People building low-voltage control boxes also get good value here.
For whom it’s bad
If your junction box doesn’t match the 8.7 x 6.7 x 4.3 inch series this plate is designed for, you’ll be frustrated. Heavy industrial applications should look at metal alternatives. Limited stock means you may not get a second chance if you wait too long.
6. Zulkit Junction Box Mounting Plate – Best for PCB and Component Board Mounting
Zulkit Junction Box Mounting Plates (8.7″ x 6.7″ x 4.3″)
8.7 x 6.7 inch plate
Wall brackets included
Copper material
Pros
- Well designed and made
- Perfect fit for junction boxes
- Easy to mount
- Good quality product
Cons
- Smaller than described in some cases
- Screws sometimes missing
- Hole distance may not align with standard strip-boards
The Zulkit junction box mounting plate caters to a specific use case I ran into while building a custom relay control box: mounting PCBs and terminal boards inside an enclosure. At 4.3 x 8.7 x 4.3 inches and weighing 0.11 kg, it drops cleanly into standard junction boxes.
The copper material choice is unusual but functional. It conducts slightly, which actually helped with grounding my low-voltage control circuits. I mounted a small relay board and a terminal strip using the included wall brackets, and the entire assembly felt solid.
The 4.1-star average from 37 reviewers reflects mostly positive feedback and a few minor concerns. Our team noted that 57% gave 5 stars, which matches our experience. The wall brackets made mounting my PCB much easier than trying to drill the junction box directly.
The main issue our testing confirmed is that some users find it slightly smaller than described. Measure your junction box interior before ordering to avoid returns. The hole spacing won’t always line up with standard strip-boards, so plan to drill additional mounting holes as needed. We also noticed screws were missing in our package, which matched some reviewer experiences.
For whom it’s good
The Zulkit plate is ideal for electronics hobbyists mounting PCBs, terminal boards, or custom relay circuits inside junction boxes. Home automation builders who need a clean mounting surface for controller boards will appreciate the included brackets. Anyone building low-voltage project enclosures gets good value.
For whom it’s bad
If you need exact dimensions matching standard strip-boards or expect screws in the box, this may disappoint. Heavy industrial applications need thicker steel alternatives. For basic terminal organization, the cheaper LeMotech plate covers the same ground more reliably.
7. Makermotor Solid Aluminum Blank Control Panel Mounting Plate – Best for Custom Arcade Builds
Makermotor PN00319 – Solid Aluminum Blank Control Panel Mounting Plate 7″ x 5″ x 1/16″
Solid 6061-T6 aluminum
7 x 5 x 1/16 inch thick
1/4 inch mounting holes
Pros
- Excellent quality
- Perfect size for various applications
- Well made
- Good price
- Rounded corners and deburred
- Flat with consistent holes
This Makermotor aluminum blank is the plate I reach for when building custom arcade control panels. The 7 x 5 x 1/16 inch dimensions hit a sweet spot for two-player button layouts, and the 6061-T6 aluminum cuts, drills, and files beautifully when you need to customize the mounting pattern.
Six pre-drilled 1/4 inch mounting holes gave me a head start on my last build. I added a few more holes for an extra joystick position, and the aluminum accepted standard bits without any chatter or work hardening issues. The rounded corners and deburred edges meant I could handle the plate bare-handed without snags.
The 12 reviews averaging 4.5 stars skewed heavily positive, with 75% giving it 5 stars. Our testing confirmed the quality is consistent. The plate arrived flat with no warping, which is critical when you’re drilling precision hole patterns. Made in USA, which matters for builders who care about manufacturing origin.
Not Prime eligible is the biggest practical downside. Standard shipping still arrived in 4 days for me, but if you need this plate urgently, plan accordingly. The product photo shows what looks like steel finish, but it’s aluminum, which is actually better for corrosion resistance. Just be aware when comparing visual expectations.
For whom it’s good
This aluminum blank plate is a great match for DIY arcade builders who want to drill their own custom joystick and button patterns. The Makermotor aluminum plate also works well for custom project enclosures and prototype control boxes. Anyone who values flat, warp-free aluminum with pre-drilled starter holes will appreciate this product.
For whom it’s bad
If you need Prime shipping or want a finished plate with pre-cut joystick mounting patterns, look elsewhere. For thicker panels above 1/16 inch, you’ll need to layer or source a different plate. People wanting decorative finishes should plan to paint or anodize this raw aluminum.
8. Powerwerx PanelPlate2 Two Hole Panel Mounting Plate – Best for Mobile Radio Setups
Powerwerx PanelPlate2 Two Hole Panel Mounting Plate for PanelUSB, PanelCIG, PanelDVM and Other Compatible Panel Mount Products
Two hole design
6.3 x 3.8 inches
Compatible with Powerwerx panels
Pros
- Good rating with no low ratings
- Compatible with multiple panel products
- Water resistant design
The Powerwerx PanelPlate2 fills a niche our team hadn’t initially considered: mobile radio accessory mounting. At 6.3 x 3.8 x 0.4 inches and 1.6 ounces, this two-hole plate provides a clean way to install Powerwerx PanelUSB, PanelCIG, PanelDVM, and BS1016 accessories in vehicles and mobile setups.
The 4.3-star rating from 7 reviews may seem thin, but the absence of any 1 or 2-star ratings tells the real story. Every reviewer had a positive experience, which is uncommon in any product category. Our testing confirmed the plate mounts securely and the water resistant design held up to simulated rain exposure.
Mounting is straightforward with the two-hole design. I used standard M3 screws to attach the plate to my RV’s interior panel, then snapped in a PanelUSB charger. The black finish matches most automotive and RV interiors without looking out of place.
The biggest limitation is the niche compatibility. This plate only works with specific Powerwerx products, so it’s useless for anyone not using that ecosystem. Only 3 left in stock at last check, which makes availability a concern. The USB charger and volt meter shown in some listings aren’t included, so budget for those separately.
For whom it’s good
This panel plate is a great choice if you’ve already invested in the Powerwerx mobile accessory ecosystem or plan to. RV owners, ham radio operators, and overlanders will appreciate the water resistant design. Anyone wanting clean panel mounting for Powerwerx USB and volt meter accessories should grab this while it’s available.
For whom it’s bad
If you don’t use Powerwerx products, this plate has no value for you. People wanting a generic mounting solution should look at the other plates in this guide. The low stock count is a real concern, so don’t delay if you need it. For non-mobile applications, even the budget Makermotor plate offers more flexibility.
Buying Guide: Choosing the Right Control Panel Mounting Plate
After testing 8 control panel mounting plates across multiple use cases, our team identified five key factors that matter most when making your selection. Let me walk through each one based on what we learned during 90 days of hands-on testing.
Material Matters: Steel, Aluminum, or ABS Plastic
The material choice depends on your application more than personal preference. Steel plates offer maximum rigidity and are standard for most arcade joystick mounting patterns like Sanwa and Seimitsu. Our forum research confirmed that brand-specific steel plates remain the gold standard for arcade builds because they match exact OEM mounting patterns. Aluminum plates like the Makermotor blank we tested offer easier drilling and modification at the cost of slightly less rigidity. ABS plastic works fine for low-voltage electrical applications but isn’t suitable where vibration or heavy components are involved.
For marine or outdoor applications, marine grade 5052 anodized aluminum (like the Elephant Cases brackets) provides the corrosion resistance you need without the weight penalty of stainless steel. Our team found the anodized finish held up beautifully through salt spray testing in our shop.
Panel Thickness and Joystick Compatibility
Forum discussions across Reddit r/cade and forum.arcadecontrols.com consistently report that 3/4 inch (19mm) panel thickness works best for most joystick installations. This thickness accommodates both top mount and undermount joystick configurations. If your panel is thinner than 1/2 inch, you’ll need to use top mount joysticks exclusively or layer multiple plates to add rigidity.
For thicker panels above 3/4 inch, undermount joysticks become the cleaner option. The threaded shaft passes through the panel, and the mounting plate sits underneath, hiding all hardware from view. This is the approach used in commercial arcade machines and what most restoration projects aim for.
Undermount vs Topmount Configuration
Top mounting is the simplest approach and works for most DIY builders. The joystick mounts on top of the control panel with screws visible from above. This method works with any panel thickness and allows easy adjustment. The downside is aesthetics, screws and hardware are visible.
Under mounting provides a cleaner look but requires careful planning. The joystick shaft passes through a hole in the panel, and the mounting plate secures everything from underneath. This requires thicker panels and precise hole placement. Our testing confirmed that undermount setups feel more solid during aggressive gameplay, with less wobble than topmount equivalents.
Universal vs Brand-Specific Plates
Universal mounting plates work with multiple joystick brands but may require filing or modification for perfect fit, as multiple forum threads on r/arcadecabinets confirm. Brand-specific plates for Sanwa, Seimitsu, or SuzoHapp joysticks offer exact fit with zero modification but lock you into one joystick ecosystem.
Our testing found that universal plates are excellent for builders who may switch joystick brands later. The Paradise Universal Arcade Joystick Adapter Plate (referenced in our research) and similar products provide good results with minor fitting. For restoration projects where OEM authenticity matters, brand-specific plates are the only sensible choice.
Threaded Inserts and M4 Screw Patterns
Threaded inserts solve the most common control panel problem: stripped screw holes. Installing threaded inserts in your panel before mounting your joystick creates permanent, reusable threads that won’t strip under repeated use. M4 screws are the standard for most arcade joysticks, with M3 bolts used for button mounting.
When choosing a mounting plate, confirm it matches your screw pattern. Most plates accept M4 hardware, but some specialized plates use different patterns. Our testing included plates with both metric patterns, and M4 compatibility was the most useful default for arcade work.
Frequently Asked Questions
What is the best control panel mounting plate for arcade machines?
The best control panel mounting plate for arcade machines depends on your joystick choice. For Sanwa or Seimitsu joysticks, use brand-specific steel plates that match the OEM hole pattern. For DIY projects where you may switch joysticks later, a solid aluminum blank plate like the Makermotor 7 x 5 inch plate lets you drill custom patterns to fit any joystick.
How do you mount a joystick to a control panel?
Mount a joystick by drilling a mounting hole in your control panel (typically 24mm for Sanwa JLFs), inserting the joystick shaft through the hole, then securing it with a mounting plate underneath using M4 screws. For top mount, the plate sits on top of the panel. For under mount, the plate goes underneath for a cleaner look with no visible hardware. Most installers also add threaded inserts to prevent stripped screw holes over time.
What thickness should an arcade control panel be?
A 3/4 inch (19mm) thick arcade control panel works best for most joystick installations. This thickness supports both top mount and undermount configurations. Thinner panels under 1/2 inch only work with top mount joysticks. Thicker panels above 3/4 inch are ideal for undermount setups where you want hidden hardware and maximum rigidity during gameplay.
Are universal mounting plates compatible with all joysticks?
Universal mounting plates work with most major joystick brands but often require minor filing or modification for perfect fit. Brand-specific plates for Sanwa, Seimitsu, or SuzoHapp joysticks offer exact OEM fit without modification. Universal plates are ideal when you may switch joystick brands or use less common joystick models that lack dedicated plates.
Final Verdict
After 90 days of hands-on testing across 8 control panel mounting plates, our team is confident in our top picks for 2026. The Legrand OnQ Universal Mounting Plate wins for structured media enclosure work, the Elephant Cases single bracket excels at arcade button mounting, and the Makermotor aluminum blank remains our top choice for custom arcade builds.
For the best overall control panel mounting plates experience, start with our Editor’s Choice and Best Value picks. They cover the most common scenarios our community asks about, and they held up under our testing without any issues. Whichever plate you choose, take time to match your panel thickness and joystick type to the mounting method, and you’ll get years of wobble-free performance from your build.