10 Best Storage Sheds With Floors (October 2026) Reviewed

Yes, your shed should have a floor if you are putting anything but a rake in it. A built-in floor keeps bins, tools and mowers off damp soil, blocks rodents and insects, and stiffens the frame so the walls resist racking. Skip it only when the shed sits on a poured concrete slab and you would rather have the extra ground clearance.

That is the whole argument for this list. The best storage sheds with floors are the ones where the deck is already part of the box, bolted to the frame before you ever unbolt a panel, so you are not building a plywood platform in a rainy weekend before you can store a single bin. Every pick below includes its floor, and we call out what that floor is made of, how thick it is, and what it will actually hold.

We compared ten floor-included sheds across resin, galvanized steel and vertical-cabinet designs, weighing the floor spec first, then the door opening, the ventilation, and how long the build takes. Floor type turned out to matter more than most listings admit, which is why we explain it in our broader storage shed guide before the picks.

Table of Contents

• Top 3 Picks for the Best Storage Sheds With Floors in 2026
  • Rubbermaid Compact Resin Shed
  • Suncast Tremont 8×10
  • Aoxun 8×6 Steel Shed
• All 10 Storage Sheds With Floors Compared in 2026
• 1. Rubbermaid Compact Resin Vertical Storage Shed With Floor – Best Overall, Editor’s Choice
  • Rubbermaid Compact Vertical Resin Storage Shed with Floor (2 x 2.5 Ft), Weather Resistant, Beige/Brown, Organization for Home/Backyard/Garden Tools/Porch/Patio Cushions/Pool Chemicals/Toys
    • Pros
    • Cons
  • Will it fit the tools you actually have?
  • Where it falls short
• 2. Aoxun 8×6 FT Galvanized Steel Shed With Floor – Best Value
  • Aoxun 8×6 FT Shed Outdoor Storage Shed with Floor Brown
    • Pros
    • Cons
  • Will the door take your mower and bins?
  • Where it falls short
• 3. Aoxun 8×6 Shed With 12mm Heavy-Load Floor – Best for Heavy Loads
  • Aoxun 8’x6′ Shed with Floor Galvanized Steel Outdoor Storage Shed Brown
    • Pros
    • Cons
  • Is the floor strong enough for real equipment?
  • Where it falls short
• 4. Mrosaa 57 cu ft Vertical HDPE Storage Cabinet With Floor – Best for Pool and Patio Gear
  • Mrosaa Vertical Outdoor Storage Cabinets,Plastic Sheds&Outdoor Storage with Floor,Outdoor Storage Box Waterproof/Lockable for Garage,Bike,Tools Storage Shed (57Cu.ft)
    • Pros
    • Cons
  • Can it handle wet, heavy and awkward gear?
  • Where it falls short
• 5. Suncast Everett 6×3 Resin Vertical Shed With Floor – Best for Narrow Yards
  • Suncast Everett 6×3 ft Vertical Storage Shed – Resin Outdoor Garden Shed with Floor, Windows, Skylight & Lockable Double Doors. Slim Yard Storage for Utility Tools & Backyard Equipment
    • Pros
    • Cons
  • Will three feet of width actually work for you?
  • Where it falls short
• 6. Patiowell 8×6 Plastic Storage Shed With Floor – Best 8×6 Resin Shed
  • Patiowell 8×6 FT Plastic Outdoor Storage Shed with Floor, Beige
    • Pros
    • Cons
  • Is the floor sturdy enough for a mower and a grill?
  • Where it falls short
• 7. Patiowell 6×4 Resin Storage Shed With Floor – Best for Small Spaces
  • Patiowell 6×4 FT Resin Outdoor Storage Shed with Floor, Light Gray
    • Pros
    • Cons
  • What fits through a 67 inch wide shed?
  • Where it falls short
• 8. Aoxun 64 cu ft Resin Storage Shed With Floor and Metal Shelving Kit – Best With Shelving Included
  • Aoxun 64 Cu.Ft Resin Storage Shed with Metal Shelving Kit & Floor, White
    • Pros
    • Cons
  • Does a flat floor matter more than shelves?
  • Where it falls short
• 9. Patiowell 10×10 Resin Storage Shed With Floor – Best for Large Yards
  • Patiowell 10×10 FT Resin Outdoor Storage Shed with Floor, Beige
    • Pros
    • Cons
  • Is the extra floor area worth the effort?
  • Where it falls short
• 10. Suncast Tremont 8×10 Resin Storage Shed With Floor Included – Best for Riding Mowers
  • Suncast 8×10 Ft. Outdoor Storage Shed – Large Resin Outdoor Shed with Floor Included, Lockable Double Doors & Skylights. 547 Cu Ft Tremont Garden Resin Sheds for Lawn Tools, Riding Mowers, & Bikes
    • Pros
    • Cons
  • Can a riding mower actually get inside?
  • Where it falls short
• Floor 101: What Shed Floor Types Actually Mean
• How to Choose the Right Storage Shed With a Floor
• Base Prep, Permits and Delivery Logistics
• Frequently Asked Questions
  • Should my shed have a floor?
  • Which sheds have built-in floors?
  • Do sheds need a foundation?
  • What is the best type of storage shed to buy?
  • Will a shed raise my property taxes or lower my home value?
• The Best Storage Sheds With Floors in 2026

Top 3 Picks for the Best Storage Sheds With Floors in 2026

The Rubbermaid wins this roundup because it builds faster than anything else here and still has a molded floor and lockable doors. The Suncast Tremont takes the mower category outright with 547 cubic feet and a floor sized for a riding mower deck. The Aoxun 8×6 is the floor spec winner on paper, with a 12mm deck rated at 82 pounds per cubic foot and a published wind rating of 25 mph.

All 10 Storage Sheds With Floors Compared in 2026

1. Rubbermaid Compact Resin Vertical Storage Shed With Floor – Best Overall, Editor’s Choice

Our pick for the best storage sheds with floors, and the fastest build in the group by a wide margin. The Rubbermaid Compact snaps together in about ten minutes with a rubber mallet and nothing else, which is unusual in a category where most listings warn you to recruit helpers. At 30 inches deep by 25 inches wide by 72 inches tall, it uses barely a corner of a patio.

The floor is the reason it made this list rather than the patio cabinet aisle. It is a molded resin deck described as impact resistant and maintenance free, integrated into the base rather than a thin sheet laid on top, so it does not flex when you roll a bin full of soil across it. Sliding the shed across the ground is the standard install, and the molded base travels with the walls instead of separating from them.

Buyers consistently point at the same strength and the same weakness. The strength is vertical storage: long-handled tools, brooms and ladders stand upright against the back panel, and the 25 inch chamber depth is enough to keep a rake handle from tipping. The weakness, mentioned often, is that shelves are not included and not offered as an accessory, so you bring your own.

Reviewers also report panel and door warping after a year or two of exposure, which is the standard resin long-term story. Doors that no longer seat shut let rain and insects in, and water collects in the textured floor surface during heavy rain. Neither issue is unique to this model, but at 4.4 stars across more than 2,000 reviews it is the most proven floor-included shed we looked at.

Will it fit the tools you actually have?

Plan for long items stored upright, not a wide footprint. A 5 square foot floor and a 25 inch wide interior suit shovels, rakes, brooms, a ladder, folding patio chairs and bagged fertilizer stacked partway up. It is not a mower shed, and it is not a place for a full-size shelving unit without a separate rack that fits the narrow interior.

Check your HOA rules before buying. A 2 x 2.5 ft footprint usually clears small-setback rules that a 6 x 3 or 8 x 6 unit would fail, and that narrowness is the entire reason this model exists.

Where it falls short

Long-term resin warping is the honest downside. Door alignment drifts once panels have seen a few seasons of sun and freeze-thaw cycles, and the textured floor is a dirt trap when rain gets in. If you want shelving, buy the whole unit at once and plan a DIY shelf, because there is no factory option.

The floor also has no published load rating, so treat it as a light-to-moderate deck rather than a mower platform. It is a tool and storage cabinet, not equipment housing.

2. Aoxun 8×6 FT Galvanized Steel Shed With Floor – Best Value

At 48 square feet with a galvanized steel frame and a 9mm snap-lock floor, this is our value pick. The floor panels interlock into the frame so the whole deck reads as one rigid surface, and buyers specifically call out that it is level and free of squeaks underfoot.

That is a real advantage over thin plastic bases. A high-density polypropylene deck at 9mm will take stacked paint cans, bags of soil and a wheelbarrow without the flex you get from a single molded sheet. The powder-coated galvanized frame is listed as rust and UV resistant, and the sloped roof with integrated air vents is designed to shed water while keeping condensation off your tools.

The build is the trade. Owners report three to five hours with a team of two or three, and the manual comes with numbered hardware, pre-drilled holes and an illustrated guide plus a video walkthrough. At 250 pounds, the delivered package is not a one-person job, which is the hidden labor cost of a metal shed with a floor.

Reviewers like the double doors with a stainless hasp for security and the wide range of sizes in the same family if you outgrow 8×6. The common complaint is durability variance, with one-star feedback sitting around 13 percent of the ratings, higher than the resin units here.

Will the door take your mower and bins?

Double doors on an 8×6 footprint open wide enough for a push mower, a couple of trash bins or a bicycle, and the flat 9mm floor rolls easily where a molded lip would not. If you are storing a riding mower, look at the Suncast Tremont further down instead, since interior width matters more than floor thickness.

Weight capacity is the number to plan around. The listing does not publish a pounds-per-cubic-foot load figure for this model, so if you are stacking heavy material, use the 12mm deck model in the next section.

Where it falls short

Three to five hours of assembly is a real time cost, and the instructions are a step up from photo-only. Shaving that time means buying this only if you already have a helper or a clear weekend.

Metal sheds without a rated gauge can flex, and one-star reviews on this model cluster around long-term panel durability and missing or unclear instructions. Anchor it if you live somewhere windy, because the frame is stronger than the panels.

3. Aoxun 8×6 Shed With 12mm Heavy-Load Floor – Best for Heavy Loads

The pick for anyone who wants a published load number on the floor. The 12mm interlocking plastic deck is rated at 82 pounds per cubic foot, which is the highest figure listed among the sheds we compared. That rating is the reason it earns a place on a list about floors rather than a list about appearance.

It is also one of only a few sheds here with a stated environmental limit: 6 inches of snow, 25 mph wind and heavy rain, across crush-resistant wall panels and waterproof joints. Most listings in this category give you nothing measurable, so this is a genuine advantage in a snow or wind zone.

Angled roof panels add overhead clearance and push snow off rather than letting it sit on a flat surface, and the integrated top vents are meant to keep tools from rusting in humid months. Double front doors open for bicycles, a generator or garden equipment, and reviewers name the angled roof and venting as the two features they notice first.

At 159 pounds it is lighter than the 8×6 model above it despite the thicker floor, which is worth noting for the move-in. The consensus is that it is a strong value for the footprint, and about 58 percent of ratings are five star.

Is the floor strong enough for real equipment?

For a generator, a full set of pots, stacked toolboxes and a push mower, the 82 pounds per cubic foot rating is the most reassuring spec on this list. Load capacity matters most when you park something with a concentrated weight rather than distributing it, like a water butt or a stack of paint.

Wind and snow figures let you check your own climate against the listing instead of guessing. If your local codes or your experience say you get more than 6 inches of snow or stronger wind, treat this as a garden-tool shed rather than a year-round shelter.

Where it falls short

Assembly is a group job. Three to four adults for about three hours, with pre-drilled numbered panels and an installation video to help, but you should not buy it expecting a solo afternoon.

Shelving is not included, so plan wall-mounted hooks or a separate rack. Around 10 percent of ratings are one star, and the reviews that turn negative usually point at assembly itself and panel durability over time.

4. Mrosaa 57 cu ft Vertical HDPE Storage Cabinet With Floor – Best for Pool and Patio Gear

Pool gear is the use case this cabinet is built for. It holds 57 cubic feet in a footprint only 27.6 inches deep, which means it sits flat against a garage wall or a fence without stealing a walkway, and owners report it holding pool equipment, bird seed and yard tools through repeated thunderstorms.

The floor is reinforced HDPE described as able to support a lawn mower or other heavy equipment, and the multi-wall resin panels will not rust or rot the way a wood cabinet base eventually does. A top groove design pushes water away for drainage, which matters a lot for a cabinet that sits in a wet corner next to a pool or a garden hose.

It also looks better than a typical shed. The wood-grain exterior was designed to blend into a garage, patio or pool area rather than read as utility equipment, and 72 percent of reviews are five star. The double-wall back panel is there for wind and impact resistance, not just looks.

Internally, a multi-hole design takes up to eight shelves, and the fit is a real advantage over the Rubbermaid at the top of this list, which offers no shelf solution at all. You buy the shelves separately, and that is the most common complaint along with the add-on cost.

Can it handle wet, heavy and awkward gear?

Waterproof construction and a grooved top make it the most sensible option here for pool chemicals, pool accessories and patio cushions that would show damp on a fabric floor. Just remember that a resin cabinet is not a chemical vault, so store pool additives in their original containers and away from food.

For a mower, the reinforced floor claims to hold one, but the ribbed base is not a structural platform. On a level, compacted base it behaves; on uneven ground it rocks, and a mower driven over a rocking floor can shift the whole cabinet.

Where it falls short

The shelf economics disappoint some buyers. The cabinet fits eight shelves and ships with none, and reviewers call the add-on price steep for what you get.

Doors can sit slightly out of alignment after assembly, and one detailed review describes the unit as flimsy and hard to close without holding the panels together. If door latching matters to you, check this one in person or look at the metal hasp models instead.

5. Suncast Everett 6×3 Resin Vertical Shed With Floor – Best for Narrow Yards

The highest rated shed in this roundup, at 4.6 stars with 76 percent five-star feedback. The Everett is what you buy when the side yard is three feet wide and you still want real storage rather than a stack of plastic bins under a tarp. Ninety-four cubic feet in a 6 by 3 footprint is a genuinely efficient use of ground.

The built-in reinforced resin floor adds strength and stability and needs no separate base, which is exactly the pitch for this guide. It sits flush against a house or garage wall, and the resin panels are easy to clean and will not rust, rot or fade, which is why owners report it still looking the same after a few seasons outdoors.

Light is a genuine feature rather than a spec-sheet item. You get lockable double doors with windows plus a skylight, so you can see a rake, a generator or a bike without turning on a work light. Built-in ventilation supports the same goal, keeping mustiness down in a unit you reach into in summer.

Assembly is designed for basic tools and a DIY setup, and optional shelves or hooks are supported for organizing generators, bikes, garden tools and pool equipment. A stated weight capacity of 1,880 pounds covers the full load of the floor.

Will three feet of width actually work for you?

It works for tall, narrow things. Rakes, shovels, brooms, a bicycle stood on end, folded chairs and shelving that runs along the 74 inch wall all fit comfortably. What it does not do is let you place a mower and a stack of bins side by side, because the interior width leaves no room for that.

Measure the wall first. Because the shed is meant to sit flush against a house or garage, leave a little air gap on the back or you will trap moisture against the wall, which is the one thing a resin floor cannot fix on its own.

Where it falls short

Cost per cubic foot is the honest drawback. Owners repeatedly note that what you pay works out high relative to the floor area, so you are buying a tall narrow shape that fits a constraint rather than the cheapest storage per square foot.

The width is a hard limit rather than a preference. If your must-have item is wider than roughly three feet, skip this and go to the 8×6 Patiowell or the Suncast Tremont.

6. Patiowell 8×6 Plastic Storage Shed With Floor – Best 8×6 Resin Shed

The most useful 8×6 in this group, and the one most likely to be missed. Owners report it holding a push mower, a gas grill, a spreader, buckets, tools and folded chairs on 41.9 square feet of floor, which is a realistic weekend of yard gear rather than a theoretical capacity number.

The Kick-it installation system is the thing to know about. You press wall panels down and kick them into slots in the base, which cuts the number of screws you need by about 35 percent, and the base itself is the floor, so the deck and the frame arrive as one structure. A UV-resistant finish helps the beige panels hold color.

The window panel can be positioned on either side of the wall, which is a real advantage in a side yard where you want light from the sun-facing edge. Owners also note the roof channels water off and away from the interior, and the material is recyclable and will not rot or rust.

A listed weight capacity of 880 pounds and a stated floor area make this the most spec-forward entry in the roundup, even where the owner reviews are mixed. That gap between the numbers and the experience is the honest thing to know before you buy.

Is the floor sturdy enough for a mower and a grill?

For a push mower, a grill and hand tools, yes. Reviewers confirm those items fit and the shed survives wind, snow and rain once it is up. The floor base is described as sturdy and reliable, and it adds a real layer of moisture protection for anything you set directly on it.

For sharp or very heavy tools, use a mat or a plywood sheet on top. Reviews do mention the floor feeling thin and puncturing under sharp points, which is normal for a resin deck and cheap to protect.

Where it falls short

Assembly is the dominant complaint, and it is a real one. Buyers report confusing instructions and diagrams, with some spending more than 20 hours on the build, and thin flexible panels that can shift during assembly in a gust of wind.

Two more practical notes: screws do not bite into plastic well on their own, so several buyers caulk the seams for a watertight finish, and the included combination lock is considered weak. The shed arrives in multiple packages, so expect more than one drop.

7. Patiowell 6×4 Resin Storage Shed With Floor – Best for Small Spaces

For a side yard, a condo patio or a strip of lawn beside a garage, 22.76 square feet of floored storage in a 6 by 4 footprint is the practical entry point. Reviewers like the small footprint, the waterproof resin and the sloping roof for basic garden and seasonal storage, and many describe the build as straightforward.

The floor is a sturdy plastic base included with the unit, and the material is listed as waterproof with a UV-resistant exterior finish, so stains wipe off and the color holds. A built-in window plus ventilation panels keep it from becoming the musty, mildew-smelling box those small sheds often turn into.

The lockable door does double duty, keeping out both theft and small animals, and the sloping roof prevents rainwater from accumulating on top. A listed weight capacity of 880 pounds and a 127 pound shipping weight make this the easiest unit here to move into position after assembly.

What separates it from the compact metal and resin cabinets above it is price and footprint, not features. It is the one to buy when your real constraint is where the shed can physically go, not what it can carry.

What fits through a 67 inch wide shed?

Lawn mowers, garden tools, pool supplies, bike equipment and seasonal decorations, which is exactly what owners report storing. The width is the limit: you can walk in and stand, but you cannot maneuver a large item in from the front without angling it.

Plan the base carefully because a 127 pound unit is still awkward to reposition once filled. Owners who mounted shelves had to add metal supports because hollow resin panels will not take a standard shelf bracket on their own.

Where it falls short

Build quality is inconsistent and the paperwork is the weakest part. At least one shipment arrived without paper instructions and with missing parts, and the booklet and video sometimes disagree or are inconsistently translated.

Skeptics find the hollow panels flimsier than advertised and worry about toppling in strong wind, so anchor it if your site is exposed. The floor can wobble and may puncture under dropped lawn tools, and doors sometimes end up skewed after assembly.

8. Aoxun 64 cu ft Resin Storage Shed With Floor and Metal Shelving Kit – Best With Shelving Included

The only pick here that is genuinely usable the day it is assembled. The metal shelving kit is in the box, which removes the single most common complaint across this category, that the shed is a good shell with no way to organize it.

The four-door layout with connection bars is the clever part. You can run the doors as four panels for maximum opening width, or convert the upper and lower pairs into two-door mode depending on what you are pulling in. For a mower, a bicycle or a stack of pots, the extra opening width is the feature that matters.

Assembly is the fastest of the large resin sheds here, with owners reporting 30 to 60 minutes for two or three people because the design uses fewer screws. The widened anti-toppling base adds stability on uneven ground, and a suction system at the top and bottom holds the doors from swinging open or slamming shut on their own.

Owners also like that the waterproof resin wipes clean and resists UV fading, and 68 percent of reviews are five star. Note that additional partitions are sold separately if you want to divide the interior further.

Does a flat floor matter more than shelves?

For heavy storage it does, and the reviews are direct about this one. Buyers recommend laying a plywood layer over the resin deck for heavy items, because the floor surface is thin and picks up marks underfoot. If you plan to park anything with wheels, add a plywood sheet or a floor mat before you load it.

For general storage the included shelving kit does the work, and the multi-hole back panel lets you reposition shelves later. If your plan is bins, bottles and folded gear, this arrangement saves you the most time.

Where it falls short

The hardware is the weak point. Some buyers report embedded hinge nuts reaming out of the resin before the screw fully seats, which leaves a hinge that cannot be fixed, and the smallest screws feel too short to be secure in plastic.

The shelving kit is also the most tedious part of the build, and some shipments arrived without a paper manual. Doors feel a bit flimsy and the handle design is hard to grip, so plan your own latch if security matters.

9. Patiowell 10×10 Resin Storage Shed With Floor – Best for Large Yards

If you have the yard for it, this is the most storage you can get without moving to a wood kit. Ninety-seven square feet of floor in a 10 by 10 layout is a genuine second garage, and reviewers point to the sheer size, the double-layer resin walls and the window-and-vent layout that keeps the interior usable in every season.

The floor is a stabilizing plastic deck, and it does more than hold things off the ground. In a unit this size it stiffens the whole shell, and a lockable double door set adds security on top of that. Circulation vents reduce humidity during rainy seasons and release heat in summer, which is what keeps a shed this large from becoming an oven.

Construction detail is better than it needs to be at this size. The panels are thickened double-layer polypropylene with double UV protection against fading, and the structure is seamless, waterproof and corrosion resistant, which is the combination that decides whether a large resin shed survives a decade of weather.

Doors have integrated windows so you can identify a tool without opening up, and the layout can be converted into a pet house or a large outdoor tool shed. A unique mounting design minimizes screws and streamlines assembly with detailed instructions.

Is the extra floor area worth the effort?

If you are clearing out a garage, yes. This holds ladders, bicycles and bulky garden equipment with room to walk around them, and the 10 by 10 footprint gives you a dedicated corner for each category rather than one pile of everything. It is also the most usable option here if you plan to work in it occasionally.

Check the daylight before committing. The multi-window layout is one of the best here, and a space this size is worth buying partly for the light.

Where it falls short

Weight is the real obstacle. At 476.8 pounds this is the heaviest model in the roundup, so you need a genuinely level foundation and several helpers to set it up, not two people and optimism.

It also arrives across ten separately numbered packages, which can come in separate deliveries, and it carries the highest cost of anything we tested. Around 11 percent of reviews are one star, with the complaints clustering around delivery batching and the sheer effort of the move.

10. Suncast Tremont 8×10 Resin Storage Shed With Floor Included – Best for Riding Mowers

This is the riding mower answer. Seventy-five point six square feet of floor under a 122 inch peak height gives a mower deck, a tractor, bicycles or a golf cart room to stand upright, and 547 cubic feet is more usable volume than anything else we tested. Owners call it the highest-capacity option in the group and use it almost like a small workshop.

The floor is included as a base, and the walls are steel-reinforced resin, which is the upgrade that separates this from a lightweight plastic shed. Those panels resist fading, rust and rot with no painting, sealing or upkeep, and the alloy steel frame underneath adds the rigidity a 384 pound structure needs.

Light is what makes the volume usable. Six skylights, large door windows and vents bring in daylight and fresh air, so finding the right tool in a 547 cubic foot space does not mean a flashlight and a ladder. Lockable double doors give you secure access once everything is stored.

Assembly is friendly for a unit this size because the parts are pre-cut and labeled and the tool list is minimal. Seventy percent of ratings are five star, and the reports focus on the shell, the volume and the skylights rather than any single complaint.

Can a riding mower actually get inside?

At 103 inches deep by 100.5 inches wide with double doors, this is one of the few sheds here wide enough to take a riding mower without disassembly, and the barn-style peak height clears a seated operator. Measure your mower including the steering wheel and any loaded attachments against the door width before you order.

The floor is a single base, so a plastic ramp is still the sensible way in and out, and the level base you build matters more here than on any other pick because of the load.

Where it falls short

Cost and weight are the two walls you hit. It is the most expensive model in the roundup, and at 384 pounds it needs a proper base and several people to assemble.

Height is the underrated issue. A 122 inch peak means it will not go under a low overhang, a covered patio or a carport, so confirm vertical clearance at the build site. If the yard cannot take the footprint, the Patiowell 10×10 is the more compact large option.

Floor 101: What Shed Floor Types Actually Mean

A shed floor is a load-bearing deck that raises your contents off soil, blocks pests, and stiffens the frame. It does not replace a level foundation, and that is the single most misunderstood point in this category. A molded floor sitting on a sloping or settling base will rack the walls and crack panel joints in a few seasons.

Owners on r/HomeImprovement repeat the same conclusion from different angles: the durability of any of these sheds comes down to a perfectly level foundation and good drainage, not to the floor panel alone. Long-term reports describe resin and steel floors staying leak-free for years, with visible wear coming from freeze-thaw cycles rather than outright failure.

There are four floor constructions worth understanding, and only three of them are genuinely good buys.

Molded resin or HDPE deck. One plastic piece formed with the base frame, common on resin and vertical-cabinet sheds. It is the most common floor on this list and needs no separate step. Its weakness is that it is a single thin sheet, so it can flex and can puncture under sharp points.

Interlocking plastic panel floor. High-density polypropylene or polypropylene panels that snap into the frame, used by the two Aoxun metal sheds here at 9mm and 12mm. This is the sturdiest floor in the roundup and the one that publishes a load rating, at 82 pounds per cubic foot on the 12mm model.

Plywood or OSB deck on a frame. Standard on wood shed kits and on the better metal sheds, with the best load capacity and the only floor you can drive a mower across without a ramp. If you find a metal shed with no floor listed, this is usually the add-on kit, and it is worth asking for the part number before you buy.

No floor, kit sold separately. Common on the cheapest metal sheds, and the reason so many buyers end up building a platform later. We left those models out of this list entirely, because a floor kit adds cost, labor and a second delivery to a purchase that was supposed to save both.

Two practical notes. A cheap fix for a thin resin deck is a floor mat or a sheet of plywood laid on top, which is also the right treatment if moisture gets trapped under bins. And a molded floor still needs a level base underneath, so treat the foundation step as part of the purchase, not an afterthought.

How to Choose the Right Storage Shed With a Floor

Start by writing down what you are storing, then measure the largest single item. That measurement, not the square footage on the listing, should set your size. A riding mower needs width and height, a garden hose reel needs neither, and buying a large shed for a garden hose is how people end up with a 100 square foot building full of nothing.

Resin, metal or wood. Resin sheds will not rot or rust and need no painting, which makes them the low-maintenance default. Metal sheds give you the sturdiest floor and the best load ratings, at the cost of assembly time and a thinner wall structure. Wood kits last longest if you are willing to maintain them, and they are the only real option if you plan to convert the space into a workshop later.

Door width and the threshold lip. This is the most common real-world disappointment with a floored shed. Measure the door opening against your equipment, and check whether the molded base has a raised lip at the threshold, because that lip is what stops a mower or wheelbarrow from rolling straight in. A ramp solves it, but you should know before the shed is built, not after.

Ventilation and condensation. A floor keeps ground moisture out, but it does nothing about condensation. Look for integrated top vents, wall vents or a skylight, all of which show up on the picks here, because a sealed box with a floor still gets damp inside when the temperature swings overnight. Owners on r/HomeImprovement describe the same pattern: the floor is fine, the air is the problem.

Size tiers. Under 100 cubic feet is a tool and bicycle shed. Between 100 and 300 cubic feet covers garden equipment, bins and a push mower. Above 300 cubic feet is where you can fit a riding mower, work at a bench, or walk in comfortably. Our Suncast Tremont pick sits at 547 cubic feet for exactly that reason.

Assembly difficulty. The resin cabinets here go up in under an hour with two people. The metal 8×6 models take three to five hours with a team of two to three, and the Patiowell 8×6 is the one to buy only if you are prepared for a long build. The 10×10 resin model is 476.8 pounds and needs several helpers, which is the labor cost nobody lists.

What not to store. No shed is a safe place for gasoline, propane, solvents, paints or pool chemicals in large quantities. Keep flammables in an approved detached metal cabinet outside, and avoid storing untreated lumber or firewood right against the wall, because attractant lumber pulls termites into a structure that is otherwise pest-proof.

If you also want to understand how these units compare across the wider category, we covered the full field, including units without floors, in the outdoor storage shed roundup. And if the shed ends up sharing a room with hardwood floors you just refinished, our cordless vacuum picks for hardwood are the ones we would reach for in there.

Base Prep, Permits and Delivery Logistics

A shed with a floor still needs a base, and the simplest adequate answer is a level pad of compacted gravel, pavers, a plywood platform or a concrete slab. Small units up to 6×4 will sit fine on gravel if the ground is level and compacted. Anything from 8×6 upward wants pavers or poured concrete, because soil compacts over time and the frame settles with it.

Lay landscape fabric under gravel to stop weeds and to stop the floor from sitting in mud, then compact in layers rather than one thick dump. A gravel pad alone invites digging animals underneath, so if rodents are a concern in your area, pavers or a slab close the gap. Check for a drainage slope away from the shed so rainwater moves off the base rather than pooling at the floor edge.

Permits and rules are where buyers get surprised. Sheds under a certain square footage are often exempt, but zoning, setbacks from property lines, and HOA rules apply either way. A 2 x 2.5 ft vertical cabinet clears most small-shed rules, while a 10×10 resin shed frequently needs a permit. On property value, a well-kept shed in good condition rarely hurts resale, and buyers notice it as storage, not as clutter. Property tax treatment varies by county, so check with your assessor.

Last, plan the delivery. Resin and metal kits arrive in oversized boxes that need at least two people to move, and the largest unit here arrives across ten separately numbered packages that may come in batches. That is a time cost that rarely shows up in a price comparison, and it is the single most common reason buyers regret the size they chose. Measure your doors, gates and stairs before the box arrives.

Frequently Asked Questions

The Best Storage Sheds With Floors in 2026

The Rubbermaid Compact Vertical Resin Storage Shed is our pick among the best storage sheds with floors, because a molded floor, lockable doors and a ten-minute build are almost impossible to find in the same package. Buy it when your constraint is space or your patience, not your storage volume.

Go bigger for a specific reason rather than a general one. The Suncast Tremont 8×10 is the one for a riding mower at 547 cubic feet, the Patiowell 10×10 is the one for clearing out a garage, the Suncast Everett handles a three-foot side yard without wasting an inch, and the Aoxun 8×6 with the 12mm floor is the one for anyone who wants a published load rating. Every one of them includes its floor.

Whatever you choose, build the base before the box arrives. A level, well-drained pad does more for how long a floored shed lasts than any spec on the listing, and it is the step most people skip.

For more on the wider category, including models we left out because their floors are sold separately, read our storage picks roundup for the rest of our tested buying guides.