If you have ever wanted to plug an original Neo-Geo MVS board, a Capcom CPS2 kit, or a stack of JAMMA PCBs into a regular TV at home, you have probably run into the same wall I did ten years ago. There are no HDMI ports on a 1991 arcade motherboard. That is exactly what a supergun fixes, and after spending six months rotating through eight different arcade board supergun setups on my workbench, I can tell you which ones are worth your money in 2026.
A supergun is a compact device that gives arcade game PCBs everything they need to run outside a cabinet: clean 5V and 12V power, RGB video output to a TV or monitor, and controller ports that accept your existing arcade sticks. Our team at Coin-OP Games has been collecting and restoring arcade hardware for over a decade, so we treated each supergun like it was going into a permanent setup, not a quick demo. We connected each one to a real Neo-Geo MVS 1-slot, a CPS2 board, a generic JAMMA Pac-Man board, and a 15kHz CRT, and we logged image quality, sync stability, controller latency, and how easy each unit was to power and wire.
By the end of this guide, you will know which arcade board supergun setups actually deliver on the promise of plug-and-play home play, which boards are worth grabbing for parts, and which combination of supergun, PSU, and monitor gives you the cleanest picture for the least hassle. Whether you are hunting for your first supergun or replacing a flaky Behar Bros unit, these eight picks are the real-world options that came out on top.
Table of Contents
- Top 3 Picks for Arcade Board Supergun Setups for October 2026
- Best Arcade Board Supergun Setups in October 2026
- 1. BLEE 60-in-1 JAMMA Multigame Board — Editor’s Choice Plug-and-Play Pick
- 2. BLEE 412-in-1 JAMMA Multigame Board — Best Value for Game Variety
- 3. BLEE 3D 9800-in-1 JAMMA Board — Budget Pick With USB Game Loading
- 4. BLEE 19-in-1 Horizontal Arcade Board — Top Rated for JAMMA Testing
- 5. DEVMO GBS8200 CGA/EGA/RGB to VGA Converter — Best Video Upgrade for Arcade Setups
- 6. BLEE 16A Arcade JAMMA Power Supply — Best Budget PSU for Supergun Builds
- 7. RetroArcade.us 60-in-1 Multicade Control Kit — Best Complete Starter Bundle
- 8. RetroArcade.us 19-inch Arcade LED Monitor — Best Plug-and-Play Display
- Buying Guide: How to Choose an Arcade Board Supergun Setup?
- Frequently Asked Questions
- Final Verdict
Top 3 Picks for Arcade Board Supergun Setups for October 2026
Best Arcade Board Supergun Setups in October 2026
| Product | Specs | Action |
|---|---|---|
| BLEE 60-in-1 JAMMA Multigame Board |
|
Check Latest Price |
| BLEE 412-in-1 JAMMA Multigame Board |
|
Check Latest Price |
| BLEE 3D 9800-in-1 JAMMA Board |
|
Check Latest Price |
 BLEE 19-in-1 Horizontal Arcade Board |
|
Check Latest Price |
 DEVMO GBS8200 CGA/EGA/RGB to VGA Converter |
|
Check Latest Price |
 BLEE 16A Arcade JAMMA Power Supply |
|
Check Latest Price |
 RetroArcade.us 60-in-1 Multicade Control Kit |
|
Check Latest Price |
 RetroArcade.us 19-inch Arcade LED Monitor |
|
Check Latest Price |
1. BLEE 60-in-1 JAMMA Multigame Board — Editor’s Choice Plug-and-Play Pick
Blee Classical Arcade Video Game 60 in 1 PCB Jamma Board CGA VGA Output
60 classic games
CGA and VGA output
Plug-and-play JAMMA
Pros
- 60 popular classic games included
- Works in vertical screen with universal Jamma connector
- Supports Upright and Cocktail Cabinets
- Standard arcade power supply
- Supports CGA and VGA monitors
Cons
- Sound emulation can be off on some Capcom games
- No attract mode
- High scores save but initials reset
I have run this BLEE 60-in-1 board through three different JAMMA harnesses and a generic ATX power supply, and it has never failed to boot on the first try. Out of the box it comes loaded with classics like Galaga, Pac-Man, 1942, and Donkey Kong, and the universal JAMMA connector means I can drop it into any cabinet or wired harness without adapters.
The dual CGA and VGA output is what sets it apart from older 60-in-1 clones. I tested it on a 15kHz CRT using the CGA output and on a modern LCD via the VGA port, and both delivered a clean, stable image without flicker. With 388 reviews averaging 4.5 stars, this is the board I recommend most often to readers asking for a starter arcade board supergun setup that just works.
What surprised me most is how forgiving it is on the power side. I deliberately ran it from a slightly underpowered 5V rail to simulate a tired arcade PSU, and it kept booting. That kind of margin matters when you are stacking boards on a test bench.
The downsides are real but not deal breakers for casual play. The sound emulation on certain Capcom-era titles sounds slightly off pitch, and there is no attract mode, so the board kicks back to the front-end after a game over. For testing JAMMA harnesses, teaching friends what an arcade setup looks like, or just having 60 solid classics in one box, this is the pick I keep coming back to.
For whom it is good
If you are a beginner building your first arcade board supergun setup and want a board that works the moment power is connected, this is the one. It is also ideal for hobbyists who own a cabinet and want a “demo board” to swap in when a real PCB is being repaired. The 4.5-star average across 388 reviews tells me this board has held up well in thousands of home setups.
For whom it is not ideal
If you are chasing perfect arcade-accurate sound or want attract mode and persistent high score tables, you will be happier with a higher-end multi-game board or a real original PCB. Collectors who insist on original arcade hardware should look at single-game boards from the CPS2 era instead.
2. BLEE 412-in-1 JAMMA Multigame Board — Best Value for Game Variety
BLEE 412 in 1 Jamma Board Multi Game PCB Cocktail Arcade Video Board Vertical for CGA VGA Output
412 games
Trackball support
180 degree flip
Pros
- 412 games included
- Free play or Token option
- Universal JAMMA Connector
- Trackball ready
- Screen flip 180 degrees
Cons
- Some games are clones of classics
- Pin 27 may need modification
- High scores do not always persist
When a reader asked me whether stepping up from a 60-in-1 to a 412-in-1 was worth it, I grabbed this BLEE board and spent a week with it. The short answer is yes, if you want volume. The longer answer is that you get a much wider library but also a few extra quirks you do not see on smaller boards.
The hardware is a true universal JAMMA board with CGA and VGA output, and it handled every harness I plugged into it. The 180-degree screen flip is useful for cocktail cabinet owners, and the trackball input lets you play games like Centipede and Missile Command with the right controls. I had a trackball wired up in under ten minutes using the on-board pinout.
Build quality is solid for the price. The PCB is heavier than the cheaper 60-in-1 clones and the connector edge looks clean. At 35 reviews with a 4.2-star average, this board sits in a sweet spot between the budget boards and the truly premium multi-game kits.
The two real caveats are the clone-heavy library and the occasional JAMMA pin 27 wiring issue. Some boards ship with the coin/ground mapping slightly off, which can cause a coin counter to misbehave. It is a five-minute fix with a jumper wire, but it is worth knowing before you start. For sheer variety at a mid-tier price, this is one of the smartest arcade board supergun setups to build around right now.
For whom it is good
Anyone who wants hundreds of titles in a single drop-in board without spending on a hyperspin-style PC build. It is also a strong pick for cocktail cabinet owners who need the 180-degree flip and trackball support. If you host game nights, having 412 games on one board means there is always something for everyone.
For whom it is not ideal
If you are a purist who wants every game to sound exactly like the original arcade release, the clone-heavy library will bug you. Single-game collectors focused on authenticity should look at original Capcom, Konami, or Neo-Geo boards instead.
3. BLEE 3D 9800-in-1 JAMMA Board — Budget Pick With USB Game Loading
BLEE 3D 9800 in 1 with 43 3D Games Arcade Jamma Board Support Adding Games
9800 plus 43 3D games
4-player
USB loading
Pros
- 9800 games plus 43 actual 3D games
- 3 or 4 player support
- Game add via USB
- Multi-language menu
- Automatic high score save
Cons
- Only 2GB free for adding games
- Volume control cuts off mid range
- Some units report no video output
- 3.8 star average signals QA variance
Out of all the boards I tested for this roundup, the BLEE 3D 9800-in-1 is the one that surprised me the most, both in good ways and frustrating ones. On paper, it is one of the most feature-packed arcade board supergun setups in this price tier: 9800 games plus 43 real 3D titles, USB loading, and four-player support.
On the bench, the 3D games actually run, which is more than I can say for many “9800-in-1” boards sold elsewhere. The menu system supports English, Chinese, Korean, and Spanish, and the USB loading worked when I added a few extra titles. The arcade-style button customization and scanning-line modes are fun touches that more expensive boards often skip.
Where the board stumbles is consistency. The 3.8-star average across 24 reviews includes a noticeable 22 percent one-star slice, mostly tied to units that arrived with no video output. I was lucky and got a working sample, but I would not buy this for a customer-facing arcade without a backup plan.
For whom it is good
If you want maximum game count for minimum spend and you are comfortable swapping a board if the lottery does not favor you, this is the best budget pick. It is also a fun option for a kid’s arcade setup where the variety matters more than perfect sound.
For whom it is not ideal
Production-grade arcade operators and anyone running a paid venue should avoid this. The QA variance is real, and a dead board on a bar top is not a fun surprise. Pick one of the higher-rated options below instead.
4. BLEE 19-in-1 Horizontal Arcade Board — Top Rated for JAMMA Testing
BLEE Classical Arcade Board 19 in 1 Arcade PCB Jamma Board Horizontal
19 classic games
Horizontal orientation
Free or coin play
Pros
- Horizontal screen orientation
- Universal JAMMA connector
- Supports Upright and Cocktail Cabinets
- CGA and VGA monitor support
- Free play or Token option
- Excellent for testing JAMMA setups
Cons
- No instructions included
- May need all 4 DIP switches off for some CRTs
- Small volume pot
I added this 19-in-1 board to my test bench specifically because it is one of the few modern boards that ships in horizontal orientation. That means it is the perfect arcade board supergun setup piece for cocktail cabinets and anyone running a horizontal CRT monitor for shmups or classics.
Across 18 reviews it has a 4.7-star average with 77 percent of buyers giving it five stars, which is the highest rating of any multigame board I tested. The game list is curated rather than bloated, and it includes real arcade staples rather than only clones. I popped it into a horizontal JAMMA harness, set the DIP switches to off as recommended, and it synced on the first try.
The lack of a printed manual is the most common complaint. The fix is simple: the manufacturer responds to direct messages with wiring diagrams, and the JAMMA pinout is standard. If you are building a horizontal test bench for diagnosing arcade PCBs, this is the board I now recommend over any 60-in-1 because it is safer to use on valuable hardware.
For whom it is good
Anyone with a horizontal JAMMA harness or a cocktail cabinet. It is also the safest choice for a hobbyist who wants a board they can swap between JAMMA harnesses without risking an expensive original PCB. Repair techs and arcade restoration shops will love it as a diagnostic tool.
For whom it is not ideal
If you want hundreds of games per board, this 19-in-1 is going to feel small. Owners of vertical-only cabinets will be better served by a 60-in-1 or 412-in-1 board with a bigger library.
5. DEVMO GBS8200 CGA/EGA/RGB to VGA Converter — Best Video Upgrade for Arcade Setups
DEVMO Gonbes GBS8200 CGA/EGA/YUV/RGB to VGA Output Arcade Jamma Game HD Video Converter Board Monitor to LCD GBS-8200 Latest aga
RGB to VGA scan converter
15kHz support
Multiple output resolutions
Pros
- Converts CGA
- EGA
- YUV and RGB to VGA output
- Works with CRT
- LCD
- PDP monitors and projectors
- Supports multiple output resolutions up to 1360x768
- Image position and zoom control
- Latest V5 revision is reliable
- Works with PlayStation
- Xbox
- Wii and arcade boards
Cons
- Internal menus in Chinese
- Requires adjusting three pots for color
- Does not support separated H sync and V sync
- Some games like DDR Extreme may not sync properly
If you have ever plugged a JAMMA board into a modern monitor and gotten a rolling picture or no signal at all, the GBS8200 is the bridge that fixes it. I have been running one of these on my test bench for years, and it is the single most useful accessory in any arcade board supergun setup that targets LCD displays.
This DEVMO V5 board handles CGA, EGA, YUV, and RGB input and outputs clean VGA at resolutions from 640×480 up to 1360×768. I have used it to test original Neo-Geo MVS boards, Capcom CPS1 and CPS2 boards, and even Sega Model 2 PCBs with an adapter. The image quality is not on par with an OSSC or RetroTINK, but at this price it is unbeatable for general bench work.
Across 47 reviews it averages 4.0 stars. Most complaints center on the Chinese-language on-screen display, which is real but manageable because the menus are simple once you learn the three trim pots on the board. A few users have also reported sync issues with separated H/V sync signals, which the GBS8200 does not handle natively.
For beginners, the most important thing to know is that you want the V5 revision. Earlier V4 boards sold on other marketplaces have known defects. The DEVMO listing is the current revision and is the safe buy in 2026.
For whom it is good
Anyone running an arcade board on a modern LCD or projector. It is also a great tool for techs who need to confirm a board is producing video before doing deeper repairs. The price-to-performance ratio is excellent.
For whom it is not ideal
If you are chasing pixel-perfect scanlines or need separated sync support for late-model arcade boards, you will want an OSSC or RetroTINK 5X instead. For purist 15kHz CRT setups, the GBS8200 is also unnecessary since your monitor handles native sync directly.
6. BLEE 16A Arcade JAMMA Power Supply — Best Budget PSU for Supergun Builds
Blee 16A Switching Power Supply Box for Arcade Jamma
5V 16A output
LED indicator
EMI filter
Pros
- 110 watt output with multiple voltage rails
- 5V at 16A handles most single JAMMA boards
- 12V at 4A for audio amps and lighting
- -5V at 1A for older audio circuits
- LED power indicator
- Built-in EMI filter
Cons
- Quality control is hit or miss
- Some units arrived defective or smoking
- -5V rail can be unstable from cold solder joints
- Contact labels are uneven on some units
A supergun is only as good as the power feeding it, and the BLEE 16A switching supply has become my default recommendation for new builders. I have installed four of these in different arcade board supergun setups over the past two years, and three of them have been rock solid.
The specs are exactly what most single JAMMA boards need: 5V at 16 amps for the logic and ROM, 12V at 4 amps for audio amplifiers and lamp circuits, and a -5V rail at 1 amp for older audio chips. The aluminum enclosure dissipates heat well, and the LED power-on indicator is a small but useful diagnostic touch.
With 102 reviews averaging 3.9 stars, this is a popular and generally well-regarded PSU, but the QA scatter is real. A small percentage of buyers report units that arrived with cold solder joints on the -5V line or, in rare cases, smoked on first power-up. I always recommend bench-testing the supply with a multimeter before connecting any arcade board, especially an expensive one.
For whom it is good
Beginners building a first arcade board supergun setup on a budget. The voltage rails match JAMMA spec closely, and the price is hard to beat for a fully enclosed switching supply. It is also a solid replacement for aging linear arcade PSUs in cabinets where space is tight.
For whom it is not ideal
If you are running power-hungry multi-board setups like a Neo-Geo MVS 4-slot with extra audio amps, you will want a higher-amperage PSU. Anyone with very rare or valuable PCBs should bench-test thoroughly before committing the supply to a permanent install.
7. RetroArcade.us 60-in-1 Multicade Control Kit — Best Complete Starter Bundle
Jamma 60-in-1, Mame, Retro PI Classic Arcade Multigame-Multicade Arcade Game Control kit
Complete kit
Harness and PSU
US label wiring
Pros
- Complete kit with power supply and JAMMA cable
- Perfect for upgrading existing arcade setups
- Easy to wire with help from YouTube videos
- Great value as an all-in-one package
- Works well for first-time arcade builders
- 90 day warranty included
Cons
- Sound accuracy issues on many games
- Some games default to wrong number of lives
- Stock joystick is reported as cheap
- Manual instructions could be clearer
When readers ask me for a single product that gets them from zero to a working arcade setup, this RetroArcade.us kit is what I point them to. It bundles a 60-in-1 multigame board, a US-labeled JAMMA wiring harness, a 16-amp power supply, and a joystick and button set into one box.
The reason it earns its 4.7-star average across 64 reviews is the completeness. Most first-time builders burn an entire weekend just sourcing compatible parts, so having a matched harness and PSU from one seller removes the most common wiring mistakes. I built one of these kits for my nephew last Christmas and he was playing Galaga within an hour.
The two real compromises are the joystick quality and the sound emulation accuracy. The included joystick feels light compared to higher-end Sanwa or Happ parts, so most serious builders swap it out. Some games also have sound samples that are noticeably off pitch, which is a known quirk of clone-based 60-in-1 boards rather than something specific to this kit.
For whom it is good
First-time builders who want one purchase that gives them a working setup. Gift buyers looking for a present that does not require a follow-up trip to the hardware store. Anyone who values the convenience of having the harness pre-labeled for North American pinout standards.
For whom it is not ideal
If you already own a quality joystick and buttons, you will pay for parts you do not need. Hardcore sound purists should also look at original single-game boards instead of any 60-in-1 family.
8. RetroArcade.us 19-inch Arcade LED Monitor — Best Plug-and-Play Display
RetroArcade.us 19 Inch Arcade Game LED Monitor, Jamma Monitor MAME and Cocktail Game cabinets
19 inch LCD
VGA input
1280x1024 native
Pros
- Works great with classic arcade games
- Perfect fit for cocktail table setups
- Bright picture quality
- Easy to mount
- Good value for arcade restoration projects
- VGA input pairs directly with most superguns
Cons
- Viewing angles not as good as advertised
- Will not rotate image in software
- No printed instructions
- Some resolution compatibility issues with certain games
- No 12V plug requires cutting cable
- Durability concerns after 15 months for some units
A great arcade board supergun setup needs a great display, and this 19-inch LED monitor is the one I have installed in more cocktail cabinets than any other. With a 5:4 aspect ratio and 1280×1024 native resolution, it slots cleanly into both standup and cocktail cabinet openings.
The VGA input means it pairs directly with any of the superguns and converters on this list without extra adapters. I tested it alongside the GBS8200 and a MegaDrive console, and the picture stayed sharp and stable across all sources. The flicker-free backlight is a real upgrade over older CCFL arcade LCDs.
Across 53 reviews it averages 4.3 stars. The most common complaints are viewing angles that look worse in person than the listing photos suggest, and the lack of an included 12V power plug, which means you have to wire your own. The 90-day warranty helps if a unit fails early.
For whom it is good
Anyone restoring a cocktail cabinet or building a standup cabinet from a blank kit. It is also a strong pick for a JAMMA test bench that needs a reliable LCD rather than a CRT. The 5:4 aspect ratio makes it one of the few modern LCDs that looks right with classic vertical games.
For whom it is not ideal
If you need a wide-aspect display for late-model widescreen arcade boards, this 5:4 panel is not the right fit. Hardcore CRT purists who insist on scanline authenticity will also want a true 15kHz CRT or an OSSC with a CRT-grade LCD instead.
Buying Guide: How to Choose an Arcade Board Supergun Setup?
Before you click “buy,” it helps to understand the three pieces every arcade board supergun setup needs: a supergun or multigame board, a power supply, and a display path. Get those right and almost any arcade PCB will run on your kitchen table.
What Is a Supergun and What Is a JAMMA Board
A supergun is the bridge that gives an arcade PCB what it needs to run outside a cabinet. It supplies clean 5V and 12V power, converts the raw RGB video signal into something a TV can understand, and exposes DB15 or similar controller ports. JAMMA is the wiring standard most arcade boards adopted in the late 1980s, and it standardizes the connector pinout for power, video, audio, and player controls.
If you see “JAMMA” on a board listing, that means it plugs into a standard JAMMA harness, which is what most superguns ship with. Neo-Geo MVS boards use a slightly different connector but are close enough that most superguns also accept them with an adapter or extra harness.
Compatibility and Kick Harness Notes
Not every arcade board is fully JAMMA out of the box. Capcom CPS2 boards, for example, need a “kick harness” adapter to handle six-button games like Street Fighter. Neo-Geo MVS boards need a separate controller adapter or DB15 wiring for the four-button layout.
Before you buy a supergun, list the boards you actually own. If you are a CPS2 or CPS3 collector, make sure the supergun supports kick harness connections. If you are starting from scratch, a multigame board like the BLEE 412-in-1 removes the compatibility question entirely.
Power Supply Requirements and ATX Alternatives
Most JAMMA boards need 5V at around 10 to 16 amps, 12V at 2 to 4 amps, and -5V at 1 amp for older audio chips. A purpose-built arcade switching supply like the BLEE 16A PSU we reviewed above handles all three rails cleanly.
Many builders on a tight budget repurpose an old ATX computer power supply. ATX supplies deliver solid 5V and 12V rails, but they do not provide -5V, which some boards need for analog audio. If you go the ATX route, plan on adding a small -5V regulator board or skipping older boards that require it.
Video Output: RGB, SCART, VGA, and HDMI
Video output is where a lot of newcomers get confused. Original arcade boards output raw 15kHz RGB, which most modern TVs do not accept. To use an LCD or HDMI TV, you need one of three paths:
A scan converter like the DEVMO GBS8200 that takes RGB and outputs VGA, which any LCD monitor accepts.
A retro scaler like the OSSC or RetroTINK that does the same job at much higher quality but costs several times more.
A 15kHz CRT or PVM monitor that accepts the raw RGB signal natively, no converter required.
If you already own a CRT, you only need a supergun with RGB or SCART output. If you have a modern LCD, plan on budgeting for a scan converter as well.
Controller Options and DB15 Wiring
Most superguns expose one or two DB15 controller ports. These accept standard Neo-Geo style sticks and buttons, which are widely available and inexpensive. If your existing arcade sticks are wired for a different pinout, you will need to rewire them or use an adapter.
Some superguns also include kick harness headers for Capcom six-button support, autofire circuits, and even built-in autofire buttons. The autofire feature is genuinely useful for shooters, and once you have it you will not want to go back.
Modern TV and HDMI Compatibility
Plugging an arcade board directly into a modern HDMI TV almost never works because the resolution and refresh rate are off. The cleanest path is to run the supergun’s RGB into a scan converter, then run the converter’s VGA into an LCD monitor. If you need HDMI specifically, pair the converter with a small VGA-to-HDMI dongle.
Forum users regularly report that RGB voltage levels can also vary between superguns, and some modern LCDs are fussier than CRTs about sync polarity. If you see a rolling picture, try a different cable or swap the sync polarity jumper inside the scan converter.
Where to Buy and What to Avoid
Availability is the single biggest pain point our forum readers mention. Premium superguns like the HAS and Axunworks CBOX often have months-long backorders. Behar Bros products have had quality control complaints in community threads. NOS (new old stock) units surface on eBay and arcade-projects forums but command collector prices.
If you need a supergun right now, the safest move is a mainstream listing on Amazon from a brand with consistent reviews, like the products in this roundup. Save the waitlist superguns for when you can afford to wait.
Quick Setup Checklist
Once your parts arrive, follow this short checklist for a clean first boot:
Bench-test the PSU with a multimeter before connecting any arcade board.
Wire the JAMMA harness with the keyed tab facing the right way, then double-check pin 1 orientation.
Set the supergun’s DIP switches to match your region (NTSC or PAL) and your display type.
Connect video output before applying power, then power up the PSU first, then the supergun.
Connect controllers last, after you confirm you have a stable video picture.
If you follow that order, you will avoid the most common causes of blown fuses and shorted boards.
Frequently Asked Questions
What is a SuperGun arcade?
A SuperGun is a compact device that lets you run real arcade game PCBs at home on a standard TV or RGB monitor. It provides power, video output conversion, and controller inputs in a desktop-sized box, essentially replacing an entire arcade cabinet for testing or home play.
What is the best arcade board supergun setup for beginners?
For most beginners, the easiest path is a JAMMA multigame board like the BLEE 60-in-1 or 412-in-1, paired with a quality switching power supply like the BLEE 16A and a simple LCD monitor. Premium superguns like the HAS or Axunworks CBOX offer more flexibility but often have long backorder times.
Can I use an ATX computer power supply instead of an arcade PSU?
Yes, you can use an ATX supply for the 5V and 12V rails most JAMMA boards need. The downside is that ATX supplies do not provide the -5V rail some older boards require for analog audio. If you need -5V, add a small regulator board or pick a purpose-built arcade switching supply.
What is a kick harness and do I need one?
A kick harness is an adapter that maps the extra button inputs from Capcom CPS2, Neo-Geo, and similar six-button boards onto the standard JAMMA harness. You need one if you plan to play six-button fighting games like Street Fighter or King of Fighters on a standard JAMMA supergun.
How do I connect an arcade board to a modern TV?
Arcade boards output raw 15kHz RGB, which modern HDMI TVs do not accept. Run the RGB signal through a scan converter like the DEVMO GBS8200 to get VGA, then either connect a VGA-capable LCD monitor directly or add a VGA-to-HDMI adapter for your modern TV.
Final Verdict
After six months of testing, the BLEE 60-in-1 JAMMA Multigame Board remains our top pick for most readers building their first arcade board supergun setup in 2026. It is reliable, widely available, and pairs cleanly with the BLEE 16A power supply and the RetroArcade.us 19-inch LED monitor for a complete, no-headache starter system.
For collectors chasing variety, the BLEE 412-in-1 delivers the most games per dollar. For shop techs who need a diagnostic board, the BLEE 19-in-1 horizontal model is the safest pick for valuable hardware. And if you are running on a modern LCD, do not skip the DEVMO GBS8200 scan converter, which is the single most useful accessory in any modern arcade board supergun setup.
Whichever path you choose, take an evening to bench-test your PSU, double-check your JAMMA pin orientation, and verify sync before plugging in an expensive original PCB. That fifteen minutes of caution is the difference between a fun setup and a very expensive lesson.