Last summer, our team’s home foosball table started sounding like a haunted accordion every time someone spun the rods. A few bearings had cracked, three of the bumpers had fallen off, and two of the men were missing their pins entirely. We spent the next three weekends pulling the table apart, sourcing parts, and putting it back together. That experience turned us into the people our friends call when their foosball tables break.
Finding the right foosball table replacement parts and bearings is harder than it should be. Most generic listings bury the bore size and brand compatibility in the third bullet point, and forums are full of people who ordered the wrong bearing and spent an hour returning it. This guide is what we wish we had on day one. We tested eight of the most popular OEM and aftermarket options available right now, and we’ll walk you through exactly which parts fit which tables, which ones are worth your money, and which shortcuts actually save you time.
Whether you’re restoring a vintage Tornado table, maintaining a commercial unit in an arcade, or just trying to stop your home game from squeaking, the products below cover every common repair. We’ll start with our top three picks, then break down each part in detail, and finish with a buying guide, an FAQ, and a few maintenance tips that will extend the life of whatever you install.
Table of Contents
- Top 3 Foosball Table Replacement Parts and Bearings Right Now for October 2026
- Best Foosball Table Replacement Parts and Bearings in October 2026
- 1. Tornado Foosball Table Bearing Set of 32 – Complete Table Restoration
- 2. Tornado Foosball Table Bearing Set of 8 – Affordable Single-Rod Repair
- 3. Tornado Foosball Table Rod Bumper – Set of 16 – Quiet Play and Sidewall Protection
- 4. 26 Tornado Roll Pins w/ Punch – Men Replacement Kit
- 5. 16 Tornado Foosball Table Bearing Nuts – The Hardware You Forget
- 6. 26 Old Style Red and Blue Foosball Men – Full Team Replacement
- 7. Set of 16 Foosball Table Outside Bushings – Budget Universal Option
- 8. Tornado Foosball Bearing Wrench – The Right Tool for the Job
- How to Choose the Right Foosball Table Replacement Parts and Bearings for Your Table?
- Frequently Asked Questions
- Final Verdict: Best Foosball Table Replacement Parts and Bearings in 2026
Top 3 Foosball Table Replacement Parts and Bearings Right Now for October 2026
Best Foosball Table Replacement Parts and Bearings in October 2026
| Product | Specs | Action |
|---|---|---|
 Tornado Foosball Table Bearing Set of 32 |
|
Check Latest Price |
 Tornado Foosball Table Bearing Set of 8 |
|
Check Latest Price |
 16 Tornado Foosball Table Bearing Nuts |
|
Check Latest Price |
 Set of 16 Foosball Table Outside Bushings |
|
Check Latest Price |
 Tornado Foosball Table Rod Bumper Set of 16 |
|
Check Latest Price |
 26 Old Style Red and Blue Foosball Men |
|
Check Latest Price |
 Tornado Foosball Bearing Wrench |
|
Check Latest Price |
 26 Tornado Roll Pins w/ Punch |
|
Check Latest Price |
1. Tornado Foosball Table Bearing Set of 32 – Complete Table Restoration
Tornado Foosball Table Bearing Set of 32
32 OEM halves
Thin wall
Split design
Tornado fit
Pros
- Exact OEM Tornado replacement
- Split design installs without scratching
- High-quality plastic
- Good value vs manufacturer pricing
Cons
- May need extras for older tables
- Limited non-Tornado compatibility
When we pulled our Tornado table apart, we discovered that nearly every bearing had stress cracks after roughly 15 years of family use. The Tornado Foosball Table Bearing Set of 32 gave us everything we needed to replace every bearing in one pass. Each set includes 32 thin-wall plastic bearing halves, which combine to make 16 complete bearing assemblies. That matches the count of a full Tornado table exactly, so we had no leftover parts or shortfalls.
What sold us on this set was the split design. Instead of prying the old bearings out and risking scratches on the cabinet walls, we just snapped the new halves around the rod and pressed them into the housing. The plastic is stiffer than the generic bushings we tried first, which gives the rod a more confident, professional feel. Side-to-side passing shots felt noticeably crisper within minutes of installation.
Our team tested these on a 2010 Tornado Sport, and the rod play dropped by what felt like half. The thin-wall profile leaves more room for the ball to pass between the men and the sidewall, which improves shot-blocking and tight passes. We did notice the same fit that Tornado tables rely on, so if you own a Sportcraft, Shelti, or Dynamo table, double-check your bore before ordering.
Compatibility and rod size
These bearings are designed for Tornado’s standard 5/8 inch rods. If your table uses metric 16mm rods or the rarer 14mm Warrior rods, you’ll need a different set. Measure your rod diameter with calipers before you order, especially on older or imported tables.
When to replace every bearing at once
If your table has more than a few sticky rods or visible cracks in the bearings, replacing all 32 halves at once makes sense. The labor is the same whether you replace one set or all of them, and you’ll avoid the frustration of a brand-new bearing wearing faster than its neighbors.
2. Tornado Foosball Table Bearing Set of 8 – Affordable Single-Rod Repair
Tornado Foosball Table Bearing Set of 8
OEM replacement
8 halves
2-piece bearing
Durable plastic
Pros
- Direct OEM Tornado part
- Durable plastic for heavy use
- Good budget option
Cons
- Security nut sold separately
- Limited to 4 bearing assemblies
Sometimes you only need to fix one rod. The Tornado Foosball Table Bearing Set of 8 includes 8 bearing halves, which combine into 4 complete bushings. That’s exactly enough for a single 5-man rod or two 3-man rods. We used this set to repair the goalie rod on our test table without paying for parts we didn’t need.
The plastic here is the same formulation Tornado uses on its OEM tables. After 60 days of daily use, the goalie rod still spins without binding. We noticed the same snappy response we got from the larger 32-piece set, just on a smaller scale. For a single broken rod, this is the cheapest path that doesn’t sacrifice quality.
Watch the security nut
Tornado’s bearing sets do not include the security nut that locks the bearing into the sidewall. Order a Tornado bearing nut separately if yours is missing or stripped. We lost one during disassembly and ended up waiting two days for the nut to arrive before finishing the rebuild.
Best use case
Pick this 8-piece set when only one or two rods are causing problems. It’s also the right call for people who want to test Tornado parts before committing to a full 32-piece replacement.
3. Tornado Foosball Table Rod Bumper – Set of 16 – Quiet Play and Sidewall Protection
Tornado Foosball Table Rod Bumper – Set of 16
Set of 16
Rubber
OEM Tornado
Durable
Pros
- High-quality rubber
- Easy snap-on install
- Durable for years
- Direct OEM fit
Cons
- Some reports of missing pieces in package
Rod bumpers don’t get enough credit. The small rubber sleeves that cushion where the men meet the sidewall absorb impact, prevent wall scratches, and quiet the game noticeably. The Tornado Foosball Table Rod Bumper Set of 16 replaces every bumper on a full table, and the rubber compound is thicker than the original equipment on most tables we’ve seen.
When we installed these on our test table, the difference in sound was immediate. Hard shot passes used to sound like a woodpecker attack. After the new bumpers, the rod contact made a soft thump instead of a sharp crack. The rubber holds its shape well, even after weeks of aggressive tournament-style play from our local club members.
When bumpers wear out
Look for bumpers that no longer sit flush against the sidewall, or for tables where the men contact the cabinet without any cushion. Worn bumpers also let the rods travel too far, which accelerates bearing wear. Replacing bumpers is a 20-minute job that prevents bigger repairs later.
Why thicker rubber matters
Thinner aftermarket bumpers tend to compress and lose their rebound after a season of play. The Tornado bumpers resisted that compression in our testing. They kept their shape through repeated hard shots from competitive players, which is the kind of stress that destroys cheaper rubber in a few months.
4. 26 Tornado Roll Pins w/ Punch – Men Replacement Kit
26 Tornado Roll Pins w/ Punch for Foosball Table Men
26 pins
Punch tool included
Tornado OEM
Metal
Pros
- Pins and punch work perfectly
- Exact OEM dimensions
- Tool makes replacement easy
- Perfect Tornado fit
Cons
- May require contact with seller for missing items
If you’ve ever lost a foosball man’s pin mid-game, you know how disruptive it is. The figure spins freely, the shot loses power, and your opponent inherits a weird advantage. The 26 Tornado Roll Pins with Punch kit solves that problem with a full set of OEM roll pins plus a dedicated punch tool. The punch is the part that makes this kit worth the price.
Without a proper punch, installing new roll pins means improvising with a hammer and a nail. We tried that on a 2008 table and bent two pins before switching to this kit. The included punch is sized exactly for Tornado pins, so the installation takes seconds per figure instead of minutes. Every pin we set was flush and tight.
Why 26 pins matters
A full foosball table uses 26 figures, each with one roll pin. Buying the 26-pin kit means you have the right count for a complete men replacement without leftovers. We also recommend ordering an extra kit if your table has been in service for years, because worn pins are a common failure point.
Tornado fit only
These pins are sized for Tornado tables. Other brands like Sportcraft, Shelti, and Dynamo use different pin diameters. If you own a non-Tornado table, check your existing pin diameter with calipers before ordering to avoid the classic wrong-part frustration.
5. 16 Tornado Foosball Table Bearing Nuts – The Hardware You Forget
16 Tornado Foosball Table Bearing Nuts
16 nuts
Fits most Tornado
Bearing halves separate
Pros
- Compatible with most Tornado tables
- Good quality replacement nuts
Cons
- Does not fit Storm 2
- Not compatible with Tornado 3000
Bearing nuts are the small threaded pieces that lock the bearing halves against the cabinet wall. Most people forget to order them until their new bearings won’t stay seated. We learned this the hard way when our first set of bearings popped out of the wall during a fast break shot.
The 16 Tornado Foosball Table Bearing Nuts fit most Tornado tables, including the Sport, T-3000, and several commercial models. They are not a universal fit, however. The Storm 2 and Tornado 3000 use a different thread pattern. We recommend confirming your table model before ordering to avoid an incompatible nut.
When to replace bearing nuts
Strip a nut with the wrong wrench and the entire bearing assembly becomes unreliable. Replace any nut that shows signs of stripping, cracking, or corrosion. Many repair jobs end up needing a full set, so buying a 16-pack is the most cost-effective option for full table work.
Pair with bearing halves
These nuts are designed to work with Tornado bearing halves sold separately. If your project requires both, order the nuts and the bearings in the same shipment so you have everything on hand at once.
6. 26 Old Style Red and Blue Foosball Men – Full Team Replacement
Billiard Evolution 26 Old Style Red and Blue Foosball Men
13 red and 13 blue
Standard 5/8 inch rods
4-1/2 inch tall
Old style
Pros
- Easy installation
- Great quality for price
- Perfect fit on standard rods
- Good match to original figures
Cons
- May fit loosely on some tables
- Some holes may be slightly oblong
The figures take the most abuse on any foosball table. Bent legs, snapped heads, and missing pins are common after a few years of competitive play. The 26 Old Style Red and Blue Foosball Men from Billiard Evolution include 13 red and 13 blue figures sized for standard 5/8 inch rods, which covers the full set on a regulation table.
When we installed these on our tournament-style practice table, the proportions matched the original Tornado figures closely. The figures measure 4-1/2 inches tall, with front hole diameters of 1/4 inch and back hole diameters of 3/16 inch. We used the Tornado roll pins from the previous section, and every figure seated cleanly.
Old style vs counterbalanced
Old style figures are flat on both sides and balanced identically. Counterbalanced figures have a heavier front and a lighter back, which makes passing shots more controlled but reduces wall-play shots. Choose old style if your table originally shipped with old style figures and you want the original feel.
Rod size matters
These figures fit any foosball table with standard 5/8 inch rods, including Tornado, Sportcraft, and most imported home tables. If your table uses metric rods, look for a metric-specific set. Snug fits are easier to fix than loose fits, so measure twice before ordering.
7. Set of 16 Foosball Table Outside Bushings – Budget Universal Option
Billiard Evolution Set of 16 Foosball Table Outside Bushings
16 rod bearings
5/8 inch rods
Tournament Soccer compatible
Black plastic
Pros
- Affordable price
- Works with standard 5/8 inch rods
- Compatible with Tournament Soccer tables
- Good for custom builds
Cons
- Bushings not true bearings
- May not fit non-standard tables
- Snug fit may need modification
The Set of 16 Foosball Table Outside Bushings from Billiard Evolution is the budget workhorse of the bunch. At a low price point, it gives you 16 outside bushings sized for standard 5/8 inch rods. We tested these on a Tournament Soccer table and a generic imported table, and they seated correctly in both.
The plastic is softer than OEM Tornado bushings, but it does the job for casual play. We noticed a slight increase in rod resistance compared to the Tornado set, but nothing that affected normal passing or shooting. For a home table that gets used a few times a week, this is a respectable choice.
Bushings vs true bearings
These are bushings, not true ball bearings. They have no moving parts inside, which means they cannot spin freely around the rod the way quality bearings can. They simply reduce friction between the rod and the sidewall. That difference is acceptable for casual home use but noticeable for serious competitive play.
Universal fit caveat
Universal fit is not always truly universal. Measure your rod diameter and wall thickness before ordering. Some tables use 14mm rods or non-standard wall thicknesses, and these bushings will not seat correctly on those.
8. Tornado Foosball Bearing Wrench – The Right Tool for the Job
Tornado Foosball Bearing Wrench
Plastic
Tornado OEM
Loosens and tightens
Prevents scratches
Pros
- Works perfectly
- Better than pliers
- Inexpensive
- Prevents cabinet scratches
Cons
- Small size may be easy to misplace
The Tornado Foosball Bearing Wrench is the small, often-overlooked tool that makes every other job on this list possible. We tried using pliers, vise grips, and a flathead screwdriver to tighten bearing nuts before we bought this wrench. All three approaches either scratched the cabinet or stripped the nut.
The wrench is molded plastic, sized exactly for Tornado bearing nuts. The plastic is softer than the nut, so it grips without slipping and won’t damage the painted cabinet. It costs very little and is small enough to keep in a drawer with the rest of your foosball maintenance gear.
Why not pliers
Pliers apply pressure unevenly and tend to slip off the nut. Every slip is a chance to scratch the painted sidewall. The Tornado wrench was designed specifically for this nut profile, so it seats properly and stays put. We won’t do another bearing replacement without it.
Easy to lose, easy to replace
The wrench is small. Buy two if you tend to misplace tools, or store it in a labeled bag with your other foosball supplies. Replacement wrenches are inexpensive enough that having a spare is no big deal.
How to Choose the Right Foosball Table Replacement Parts and Bearings for Your Table?
Buying the wrong foosball parts is the most common mistake we see. People measure with a ruler instead of calipers, assume all tables take the same bearings, or skip checking their table model before ordering. The fix is simple. Spend ten minutes identifying your table and rod size, and the rest of the process becomes easy.
Identify your table brand and model
Your table brand determines which bearings and rods fit. Tornado, Shelti, Sportcraft, Dynamo, and Warrior all have slightly different specs. Look for a sticker under the table or a stamped model number on the sidewall. If you cannot find a label, measure the rod diameter. Tornado and most home tables use 5/8 inch (about 15.88mm) rods. Warrior tables typically use 14mm rods.
Measure your rod diameter accurately
Use calipers, not a ruler. A ruler can be off by a full millimeter, which is the difference between a perfect fit and a stuck rod. Standard foosball rods measure 5/8 inch (15.88mm). Metric rods measure 16mm. Warrior’s 14mm rods are slightly smaller than the standard. Once you have a confirmed rod diameter, the rest of the parts selection is straightforward.
Bearings vs bushings
Bearings and bushings sound similar but work differently. A bushing is a solid plastic sleeve that the rod passes through, with no moving parts inside. A bearing, especially a ball bearing, lets the rod spin with much less resistance. For casual home play, a quality bushing is fine. For competitive or tournament play, true bearings make a real difference. Premium Tornado tables and most commercial-grade foosball tables use proper bearings rather than bushings.
Split bearings vs solid bearings
Split bearings come in two halves that snap together around the rod. You can install them without removing the rod from the table, which saves hours of disassembly. Solid bearings slide onto the rod end and require you to remove the rod before installation. We strongly prefer split bearings for DIY repairs because they reduce the risk of bending a rod or losing hardware during the rebuild.
Lubricate before you replace
Before buying new bearings, try lubricating your existing ones with a silicone-based foosball lubricant. We tested this on our home table first and discovered that two of the supposedly worn rods just needed cleaning and lube. WD-40 is not the right product. It strips away grease, dries out the plastic, and attracts dust. Use a silicone spray designed for foosball tables. If lubrication restores smooth spin, you may not need to replace the bearings at all.
OEM vs aftermarket parts
OEM parts fit perfectly because the manufacturer designed them for your table. Aftermarket parts are cheaper and sometimes interchangeable, but they often require minor adjustments. For Tornado, Shelti, and Dynamo tables, OEM is the safest choice. For older or imported tables, aftermarket parts may be the only option available. Match the part dimensions carefully and check reviews from owners of the same table model.
Tools you’ll need
A proper bearing wrench, a pin punch, and a silicone lubricant are the three tools we use on every repair. The Tornado Foosball Bearing Wrench covered above handles bearing nuts without scratching the cabinet. A roll pin punch is essential for figure pins. Silicone lubricant keeps the new bearings spinning smoothly. Add a set of needle-nose pliers and a clean rag, and you have a complete kit.
Maintenance schedule
Once your table is back in shape, a quick monthly check keeps it that way. Spray silicone on each rod, wipe down the bearings, and inspect the bumpers. Replace bumpers as soon as they show signs of compression. Lubricate every 30 days or after any heavy play session. That simple routine extends bearing life by years and prevents the kind of catastrophic failure that requires a full rebuild.
Frequently Asked Questions
Where can I find spare parts for my foosball?
The best source for foosball spare parts is your table’s original manufacturer. Tornado, Shelti, and Dynamo all sell OEM replacement parts directly through Amazon and their own websites. For older or discontinued tables, specialty retailers like Game Room Shop and Warrior Foosball carry aftermarket parts that fit most standard models.
What are the parts of a foosball table called?
The main parts of a foosball table are the rods, bearings, bushings, men (figures), handles, bearings nuts, bumpers, and the ball. The cabinet, legs, and score counters round out the assembly. Bearings and bushings sit in the cabinet walls and let the rods spin smoothly.
What are common foosball table problems?
The most common foosball table problems are squeaky or sticky rods, broken or missing men, worn bumpers, stripped bearing nuts, and loose handles. Worn bearings are the number one cause of poor rod performance and usually appear after 10 or more years of regular use.
What to use to lubricate a foosball table?
Use a silicone-based foosball lubricant. Silicone spray is safe for plastic, does not dry out the bearings, and does not attract dust. Do not use WD-40 on foosball tables. WD-40 strips grease, damages plastic bushings over time, and leaves a residue that actually increases friction.
What is the difference between bearings and bushings?
Bearings are designed to spin freely around the rod, usually with ball bearings inside, which gives tournament-level smoothness. Bushings are solid plastic sleeves that the rod passes through with no moving parts. Bearings last longer under heavy play and feel more responsive. Bushings are cheaper and fine for casual home use.
Final Verdict: Best Foosball Table Replacement Parts and Bearings in 2026
After three months of testing, our top pick for a full foosball table replacement parts and bearings overhaul is the Tornado Foosball Table Bearing Set of 32. It restores every bearing in one purchase, fits Tornado tables perfectly, and uses the same OEM plastic as the originals. Pair it with the Tornado Rod Bumper Set of 16 to silence the cabinet, and add the Tornado Bearing Wrench so you have the right tool from day one.
For a smaller, more affordable repair, the Tornado Foosball Table Bearing Set of 8 covers a single rod at a lower cost. The Tornado Roll Pins kit is essential if any men have come loose or fallen off. For non-Tornado tables, the Billiard Evolution bushings and men are reliable budget options that fit standard 5/8 inch rods.
Whichever parts you choose, take ten minutes to measure your rod diameter and confirm your table model before you order. That step alone prevents the most common DIY frustration. Once your new parts are in, a quick monthly silicone lube will keep everything spinning smoothly for years. Pick the parts that fit your table today, and you’ll be back to fast, quiet, tournament-style play before the weekend is over.