A power lift chair is two things at once: a mobility product that somebody may depend on every hour of the day, and the lowest, softest, most appealing seat in the house as far as a dog or cat is concerned. That double identity is why picking among the best lift chair covers for pets is harder than picking a couch cover. A cover that protects the upholstery perfectly can bunch under the footrest, block the remote, or make it awkward for an older person to push up out of the seat.
We spent six weeks comparing ten lift chair covers specifically against that problem. Each one had to clear three gates before it made our list: it protects the chair from what the pet actually does to it, it stays clear of the moving parts of a power lift recliner, and it stays comfortable for the person sitting in it all day. Anything that failed one of those three was out, regardless of how good it looked in a photograph.
Most of the category’s mediocre ratings trace back to a bad fit or an inflated waterproof claim rather than a bad product, and we explain that in full further down. If you are still choosing the chair itself, start with our power recliner picks first, then return here to cover it properly. Our pricing and availability notes were checked on 2 October 2026 and we refresh this list every few months.
Table of Contents
- Best Lift Chair Covers for Pets (October 2026)
- All 10 Covers Compared at a Glance in 2026
- 1. Ameritex Waterproof Nonslip Recliner Cover, Beige 23 inch — Best Overall
- 2. TAOCOCO 100% Waterproof Recliner Chair Cover, Grey 23.6 inch — Best Value
- 3. VANSOFY 100% Waterproof Recliner Chair Cover, Dark Blue 23.6 inch — Category Leader
- 4. Ruaozz 100% Waterproof Recliner Chair Cover, Chocolate 23 inch — Best on a Budget
- 5. Furhaven Waterproof and Non-Slip Recliner Cover with Side Pockets, Grey
- 6. HAOMAIJIA Faux Fur Recliner Chair Cover, Grey 23 inch — Best Plush and Warmest
- 7. ANARACHON Leather Look Recliner Cover, 4 Piece Set, Dark Brown
- 8. wokire Heavy Duty Clear Plastic Recliner Cover, 36 inch
- 9. H.VERSAILTEX 100% Waterproof Power Lift Recliner Cover, Lily Pad 23 inch
- 10. Turquoize 100% Waterproof Power Lift Recliner Cover, Grey 22 inch
- How to Choose a Lift Chair Cover for Pets
- Measure your lift chair in five dimensions before you buy
- Lift chair mechanics: footrest, remote clearance and recline movement
- Cover types compared: quilted throw, stretch slipcover, fitted set and vinyl
- Waterproof versus water-resistant, and why the labels mislead
- Comfort for the person who sits in the chair all day
- Why many covers in this category have mediocre reviews
- How We Picked and Why You Can Trust This List
- Frequently Asked Questions
- The Best Lift Chair Covers for Pets in 2026, by Use Case
Best Lift Chair Covers for Pets (October 2026)
Ameritex Recliner Cover 23…
- 100% waterproof 5-layer quilt
- Silicone paw-print anti-skid backing
- Remote pockets on both sides
- Fits recliners to 23 inch
TAOCOCO Recliner Cover…
- 5-layer quilted waterproof
- Colloid grip plus straps and buckle
- Six side pockets
- Washable at 30C
VANSOFY Recliner Cover…
- 4-layer waterproof fabric
- Colloid backing holds on leather
- Three utility side pockets
- Fits to 23.6 inch sitting width
All 10 Covers Compared at a Glance in 2026
| Product | Specs | Action |
|---|---|---|
| Ameritex Waterproof Nonslip Recliner Cover 23 inch |
|
Check Latest Price |
| TAOCOCO Waterproof Recliner Cover 23.6 inch |
|
Check Latest Price |
| VANSOFY Waterproof Recliner Cover 23.6 inch |
|
Check Latest Price |
 Ruaozz Waterproof Recliner Cover 23 inch |
|
Check Latest Price |
 Furhaven Waterproof Non-Slip Recliner Cover |
|
Check Latest Price |
 HAOMAIJIA Faux Fur Recliner Cover 23 inch |
|
Check Latest Price |
 ANARACHON Leather Look 4 Piece Cover Set |
|
Check Latest Price |
 wokire Clear Plastic Recliner Cover 36 inch |
|
Check Latest Price |
 H.VERSAILTEX Waterproof Power Lift Cover |
|
Check Latest Price |
 Turquoize Waterproof Power Lift Cover 22 inch |
|
Check Latest Price |
1. Ameritex Waterproof Nonslip Recliner Cover, Beige 23 inch — Best Overall
Ameritex Waterproof Nonslip Recliner Cover Stay in Place, Dog Chair Cover Furniture Protector, Ideal Recliner Slipcovers for Pets and Kids (Beige, 23″)
Waterproof 5-layer quilt
Silicone paw-print anti-skid backing
Remote pocket both sides
Fits recliners to 23 inch
Pros
- Proven grip on leather and cloth
- Five-layer quilted build
- Remote pocket on both arms
- Exceptionally wide size range
- Machine washable
Cons
- No dedicated power lift or footrest strap
- Package dimensions are not the true cover size
This is the one we ended up recommending to friends, and the reason is the review base rather than a single clever feature. More than 13,000 ratings sit behind it, which means the fit, the grip and the wash performance have been checked by far more households than any other cover in this roundup. In a category where most listings have fewer than 100 reviews, that kind of track record is worth more than another layer of fabric.
The construction is a five-layer quilt with a waterproof layer in the middle and a silicone puppy-paw pattern on the underside. That paw pattern is the part that matters most in a lift chair home: it grips smooth leather as well as cloth upholstery, and it keeps working when the chair rocks forward during a lift cycle. The quilted top also doubles as a usable surface, so the pet can lie on the chair without you worrying about claws reaching fabric.
Size choice is where this brand genuinely stands apart. The same cover is listed for an XL sofa up to 78 inches, a sofa up to 68 inches, an oversized loveseat up to 54 inches, a loveseat up to 46 inches, an oversized recliner up to 30 inches, a standard recliner up to 23 inches and an armchair up to 23 inches. If your lift chair has an unusual footprint or a wide arm, there is a good chance one of those ranges already fits it, which removes the single most common reason covers fail.
There are storage pockets on both sides, which matters more here than on an ordinary recliner because the remote for a lift chair is not optional equipment. Lose the remote and you lose independent control of the chair position. Two pockets also mean the person sitting down does not have to ask somebody else to hand them the handset.
What to check before you order
Measure the sitting width of the chair, not the overall width including the arms, and compare it against the stated size. This cover runs to 23 inches for a standard recliner and 30 inches for the oversized version, so an oversize measurement will get you the smaller cover if you are not careful.
Also note what it does not do. There is no dedicated power lift strap or footrest band, so it holds position through silicone grip and elastic rather than through hardware loops. On a chair that is reclined and lifted often, that difference is noticeable after several months of use.
Who should skip it
Skip this one if your chair is very narrow, or if you need a cover that latches onto the underside of the seat frame so it cannot ride up during a lift cycle. Covers with elastic loops and footrest bands are better suited to a heavy-use power lift, and we cover two of those further down.
The other reason to pass is purely cosmetic. The finish is functional and quilted rather than decorative, so on a light-coloured chair in a formal room it will read as protection rather than as styling. If appearance is the deciding factor, the faux leather set and the plush option later in this list solve that differently.
2. TAOCOCO 100% Waterproof Recliner Chair Cover, Grey 23.6 inch — Best Value
TAOCOCO 100% Waterproof Recliner Chair Cover, Non Slip Recliner Covers for Recliner Chair with Pocket, Washable Reclining Chair Cover Furniture Protector for Kids, Pets(23.6”, Gray)
Waterproof coated 5-layer quilt
Colloid grip plus straps and buckle
Six pockets across both arms
Fits 23.6 inch seat width
Pros
- Three point anti-slip system
- Five-layer quilt stays soft when washed
- Three pockets on each side
- Low profile fit
- Washable at 30C
Cons
- Water can pool along fitted seam edges
- Larger size can run big if you mismeasure
This is the cover we would put on a chair in a house with a large, enthusiastic dog. Its grip system has three parts rather than one: a solid round colloid pattern across the back, flexible elastic straps, and two elastic bands with a matching buckle at the seat back. Reviewers repeatedly report that the cover does not shift around during daily recline use, which is the specific complaint we heard most often about simpler covers.
It also carries more pockets than almost anything else at this level. There are three on each side, so six in total, and owners use them for the remote, a phone and snacks. On a lift chair that a person may use for several hours at a stretch, having both arms available matters, and a one-sided pocket arrangement immediately puts the handset out of easy reach.
The fabric is quilted from five layers with a soft textured inner fill, and the waterproof layer is coated onto the top of the base fabric rather than being a thin film. That is why it still feels soft after repeated washing. Care instructions call for a machine wash at a maximum of 30 degrees Celsius, no bleach and no ironing, which makes laundry day a low-effort job rather than a special project.
One practical note: the cover fits a chair with a seat width of 23.6 inches, and buyers report that the larger sizes in the range can run big. If your chair sits near a size boundary, measure twice and lean toward the smaller option, because extra material at the arm tends to crease rather than hang flat.
How it behaves on leather and vinyl
The colloid grip pattern is the reason this cover is a safe bet for smooth leather lift chairs as well as cloth ones. A soft quilt on its own slides on a leather seat the moment a dog turns on it, but a patterned backing gives the fabric something to bite into. Expect the cover to move very little without straps being retightened every week.
Be aware of one geometric quirk. Owners who fit the cover at an angle report that a small amount of water can catch along the fitted edges at the seams. If your pet’s accidents tend to be concentrated rather than spread out, wipe the seam line after each incident rather than relying on the cover alone.
Who should skip it
Skip this cover if you want the quietest possible surface for someone who is sensitive to texture under their legs, or if you plan to leave it on a chair in a hot room through summer. A five-layer quilt is warmer than a single-layer stretch cover, and people who cannot tolerate warmth on their legs tend to complain about it within a few weeks.
It is also not the right pick if your pet chews fabric. This is a barrier against hair, spills and light scratching, but the top layer is polyester quilt rather than a dense twill or a faux leather surface, so a determined chewer will find the edge given enough time.
3. VANSOFY 100% Waterproof Recliner Chair Cover, Dark Blue 23.6 inch — Category Leader
VANSOFY 100% Waterproof Recliner Chair Covers, Recliner Cover Non-Slip Dog Chair Cover Furniture Protector Washable Slipcover with Pocket, Elastic Straps for Pets, Dogs(Dark Blue, 23.6″)
4-layer fabric with waterproof layer
Anti-slip colloid backing with buckle
Three utility side pockets
Fits to 23.6 inch sitting width
Pros
- Top selling slipcover in its category
- Four layers with full waterproof core
- Holds on leather recliners
- Stays waterproof after repeated washing
Cons
- Pockets on one side only
- Extra material may need tucking into seams
This one sits at the top of the Recliner Slipcovers category ranking, and with more than 7,000 reviews behind it the rating is not a surprise. It is also one of the few covers in this roundup that publishes three usable measurements rather than a single width figure: sitting width up to 23.6 inches, armrest width of 22 inches and a back length of 48.8 inches. Those numbers let you check fit properly before you order, which removes most of the guesswork.
The waterproofing is a full layer inside a four-layer build rather than a surface treatment, and owners report it stays waterproof after multiple washes. That distinction matters more than it sounds. A coating sits on top of the fabric and eventually fails; a layer inside the laminate goes all the way through and does not.
For anti-slip, it combines a colloid pattern on the back with elastic straps on the top and back of the cover and a round buckle. Reviewers specifically call out that it holds on leather furniture, which is a common failure point for pet covers in leather-and-vinyl lift chair homes. The listing also names leather recliners as a suitable use, so the fit has been tested on that surface rather than only claimed.
Installation is a single-piece drape and tuck, and the arm length is reported not to drag on the floor. Care is a machine or hand wash at 30 degrees Celsius followed by air drying, which is a gentler instruction than a tumble dry and reduces the chance of the elastic shrinking.
Where the three pockets matter
All three utility pockets sit on one side, and that is the clearest compromise in this cover. If the person using the chair sits with the remote on a particular side, this works perfectly. If they alternate, or if a caregiver reaches from either side, you will be moving the handset around more than you would with a two-sided arrangement.
You can put a small caddy or a hook under the arm if that becomes annoying. Several owners solve it that way rather than replacing the cover, since the pockets themselves are deep enough for a phone, a magazine and a tablet.
Who should skip it
Skip it if you dislike the tuck-in step. There is more material than a single-piece cover strictly needs, so several buyers report needing to tuck the excess into the chair seams to get a close fit. If you want something you can pull off in one motion without adjustment, look at the split four-piece set later in this list.
It is also not designed for power lift hardware. It secures by grip and elastic, with no loops that attach to the frame underneath, so it works best on a standard recliner that moves occasionally rather than a power lift that rocks several times a day.
4. Ruaozz 100% Waterproof Recliner Chair Cover, Chocolate 23 inch — Best on a Budget
Ruaozz 100% Waterproof Recliner Chair Covers, Non-Slip Reclining Covers for Recliner Chair Washable Chair Cover, Recliner Covers with Pockets for Kids, Dogs, Pets (Chocolate, 23”)
4-layer quilted waterproof polyester
Colloid grip with straps and buckles
Side pockets for remote and phone
Fits 23 inch seat width
Pros
- Genuinely holds position on large recliners
- Six deep pockets across both arms
- Soft fabric that does not look clinical
- One-piece drape and tuck
Cons
- Some covers arrive with a short upper-back strap
- Strap colour can clash with the cover
Owners with large recliners single this cover out because it is one of the few wide enough for their chair without a fight, and because it does not need constant repositioning. The grip system pairs a solid round colloid pattern on the back with elastic straps on top and an elastic band on the seat, secured with round buckles. It is a complete system rather than grip alone, and it is the reason the cover stays put.
The pocket arrangement is unusually generous. Reviewers describe six deep pockets spread across both arms, deep enough for a remote, a tablet, books and snacks. As with the TAOCOCO, having storage on both sides matters on a lift chair because the user may not be able to reach behind or underneath themselves easily.
Comfort is the quiet strength here. The inner fill is described as thick and soft, and owners note the fabric does not feel sweaty or clinical for a lounge chair. That sounds like a small point until you remember that this surface sits under a person for hours at a time, and a stiff quilt is the fastest way to make a cover get removed within a week.
Care is straightforward: a one-piece design, machine wash at 30 degrees Celsius, hang to dry and no bleach. The listing recommends hand washing the elastic straps, which is a reasonable precaution if you want them to stay tight over several years.
Checking the upper-back strap
The most common complaint we saw for this cover was about packaging rather than performance: some covers arrive with a single shorter rear strap, so the upper back is not held as securely as the product images suggest. It is a simple fix once you know to look, and it is the first thing to check when the cover first arrives.
Also expect the elastic strap colour to be a separate shade from the cover fabric. On the chocolate version the contrast is mild, but on lighter shades it is more noticeable. If the match bothers you, strap covers or a folded throw over the top of the back solves it in seconds.
Who should skip it
Skip it if appearance is the priority. This is a functional quilt in a brown checkered finish, and it will read as protective equipment rather than decor. If the chair lives in a formal sitting room and you want it to look deliberate, the faux leather set or a stretch fabric option suits that situation better.
It also runs to a 23 inch seat width, so an oversized lift chair with a wider seat is outside its range. Check your measurement first, because oversizing a cover of this type does not improve fit, it just adds fabric that has to be tucked out of sight.
5. Furhaven Waterproof and Non-Slip Recliner Cover with Side Pockets, Grey
Furhaven Waterproof & Non-Slip Recliner Chair Cover Protector w/ Side Pockets for Dogs, Cats, & Children – Quilted Paw Print Living Room Furniture Cover – Gray, Recliner
Impermeable waterproof core layer
Quilted paw print surface
Slip-resistant backing with anchors
Covers seat back and both arms
Pros
- Genuinely waterproof core that beads liquid
- Quilted surface pets can sleep on
- Cushion anchors included in the box
- Backed by a 90 day limited warranty
Cons
- Elastic band alone can allow sliding
- Seat seams can loosen with large strong dogs
This is the pick we recommend when the chair is genuinely part bed for the pet. The quilted surface is described as gentle on noses and paws, and in practice owners treat the covered chair as the place the dog settles rather than somewhere they tolerate it. That matters because a pet that naps on the bare chair every day is the single most reliable route to fur worked deep into the seams.
The waterproofing here is an impermeable core layer, not a coating, and owners report that liquid beads on it rather than soaking in. Beading is a useful property for a different reason too: you can see immediately that an accident has happened, and clean it, instead of finding out a week later when there is an odour problem.
It covers the seating area, the backrest and both armrests, which is the coverage that forum buyers most often complain is missing from cheaper covers. Fixation is a slip-resistant backing plus an elastic band plus cushion anchors, and the anchors are included in the box rather than sold separately, so you are not hunting for hardware after it arrives.
This is also one of the few covers here with a real warranty behind it: a 90-day limited manufacturer warranty for material defects, plus a 60-day worry-free return programme if you register within 14 days. That is worth checking before you buy from a third-party reseller, because coverage may not apply there.
Size, shape and where it sits on the chair
The recliner version has a 25 inch base width with overall dimensions of 85 by 90 inches. That is a larger footprint than a conventional fitted cover, which is how it reaches both arms and the backrest. Check your chair width against 25 inches before ordering, and allow for the fact that the extra material is what gives the arm coverage.
Because it is a drape rather than a fitted shell, you should expect to smooth it into place each time you put it on. That is the trade for full coverage, and reviewers who like this cover tend to be the same people who like washing a single large item rather than reassembling four separate panels.
Who should skip it
Skip it if your dog is large and strong and frequently leaps onto the chair. Owners of heavy dogs report that seat seams can loosen after heavy use, and that the elastic band on its own is not always enough to stop the cover sliding down on some furniture. The cushion anchors help, but they are a supplement rather than a replacement.
At 2.2 pounds this is also the heaviest cover in the roundup, and it is bulkier than a fitted quilt. If someone with limited mobility needs to pull the cover on and off frequently, that extra bulk is worth thinking about before you commit.
6. HAOMAIJIA Faux Fur Recliner Chair Cover, Grey 23 inch — Best Plush and Warmest
HAOMAIJIA Faux Fur Recliner Chair Covers Non-Slip Waterproof Recliner Covers That Stay in Place Warm Thick Lazy Boy Recliner Cover for Dogs Furniture Protector Pet Friendly (Grey, 23”)
Warm faux fur plush surface
Three layers with TPU film core
High density anti-slip particles
Cinch cord closure
Pros
- Highest average rating in the group
- Plush surface doubles as a pet bed
- TPU waterproof film between layers
- Holds firm on leather under jumping
Cons
- Pile runs warm in summer
- Only one colour and size pairing per listing
This cover scores highest on rating among the ten we reviewed, at 4.6, with 78 percent of ratings at five stars. That is a strong signal that what it promises, it delivers consistently. It is also the most unusual option here: rather than hiding the chair, it turns the chair into something people and pets both seem to like sitting on.
The build is three layers. A scratch-resistant plush surface sits on top, a TPU waterproof film runs through the middle, and a high-density anti-slip particle layer sits underneath. Putting the film between the two fabrics rather than on the outer face means the waterproof barrier survives washing, and the plush face stays soft rather than becoming a sticky coated sheet.
The anti-slip backing uses high-density particles that form a strong bond with leather recliner surfaces, and the brand describes the fit as working in all directions with no dead angle, which is marketing language but matches how owners describe the behaviour. Buyers report that it stays in place even when a pet jumps on it, which is the hardest grip test in this category.
It also will not shed hair or colour and is described as holding its shape after prolonged use, two failure modes that normally show up within a few washes on plush covers. Care is vacuuming for routine cleaning, a gentle machine wash, no bleach, and low-temperature or hang drying.
Comfort versus heat, honestly
The obvious trade-off is warmth. Plush pile is insulating, and buyers do note that this cover runs warmer than a fitted cotton-style cover in summer. In a house with central heating and a pet that spends the afternoon on the chair, most people never notice. In a warm room with a chair used by someone sensitive to heat, it is a genuine problem from about mid-afternoon onward.
The other practical point is the closure. This uses a cinch cord rather than elasticated straps, so it takes seconds to remove and go into the wash. Several buyers who preferred simpler covers made exactly this point, saying that covers with straps and extensive tucking get taken off and washed far less often because of the effort involved.
Who should skip it
Skip it if you need the chair to look like furniture. A shaggy faux fur surface on a power lift chair is a deliberate statement, and while plenty of people like it, it is not a neutral cover. In a room that is otherwise traditional, this reads as casual.
It is also worth noting that the plush pile is not a claw-proof surface. It resists scratching better than a flat-weave throw, but it is a pile fabric rather than a dense twill, so a determined cat will still work at it over time. If scratches are the primary concern, think about a woven or leather-look surface instead.
7. ANARACHON Leather Look Recliner Cover, 4 Piece Set, Dark Brown
ANARACHON Leather Look Recliner Chair Covers Heavy Duty, 4 Pieces Recliner Cover for Recliner Chair, Leather Cover for Recliner Slipcovers Washable for Pets (Dark Brown)
85 percent polyester and 15 percent spandex
Back footrest and two arm covers
Elastic edges and fixed anti-slip ropes
Fits recliners 24 to 33 inch
Pros
- Four separate pieces cover only what is worn
- Breathable rather than sticky
- Anti-slip ropes hold the arm panels
- Refreshes a dated recliner cheaply
Cons
- Not water resistant so no spill protection
- Back panel can run small on narrow chairs
- Colour reads more matte than glossy leather
This set solves a different problem from the rest of the list. Most buyers are not protecting against a wet accident, they are trying to make a ten-year-old recliner look deliberate again. The fabric is a faux leather made from 85 percent polyester and 15 percent spandex, chosen because it is breathable and does not pill, and because it can be machine washed and dried without cracking the way real leather-look vinyl often does.
It arrives as four pieces rather than one shell: a backrest cover, a footrest cover and two arm covers, with a paper guide included. That modularity is the real feature. If only the arms are worn through from years of a dog climbing up, you replace two panels and spend nothing on the rest.
Fit is handled with premium elastic edges plus fixed ropes that keep the panels in place. The set is designed for large recliners between 24 and 33 inches wide, which makes it one of the few options here that genuinely covers a wide power lift chair rather than stopping at the 23 to 24 inch mark.
The listed care is a machine wash with no bleach and no ironing. The single most important fact about this set, though, is that it is not water resistant. It protects against hair, sweat, daily dirt and pet scratches, and against nothing you can pour on it.
How the faux leather feels for long sitting
Buyers consistently rate the softness and breathability highly, specifically noting that it does not feel sticky or sweaty the way cheaper faux leather often does. The spandex content is what gives it that stretch and give, and it also means the panels hug a rounded armrest instead of tenting over it.
Expect a more matte finish than the photographs suggest. This is a close match for leather grain and texture, but it does not have the gloss of genuine leather, and on a dark chair the difference is visible in daylight. If gloss matters to you, this will not fully deliver it.
Who should skip it
Skip it outright if there is any incontinence risk, any drool problem or a pet who spills drinks. The fabric is explicitly not water resistant, so a spill goes straight through to the upholstery. For those situations you want a layer-based waterproof cover from earlier in this list.
Also check your chair width carefully. The headrest and back panels can run small on narrower recliners even when the arm covers fit, because the back panel is sized for the widest chair in the 24 to 33 inch range. Measure the back height as well as the width before ordering.
8. wokire Heavy Duty Clear Plastic Recliner Cover, 36 inch
wokire Heavy Duty Plastic Recliner Cover Pets | Cat Dog Scratching Protector Clear Vinyl Waterproof Sofa/Couch Covers,Furniture Living Room Chairs for Storage and Moving 36″ W – Armchair（1 Pack）
Crystal clear heavy-duty vinyl
Waterproof and wipe clean
Elastic closure for quick fitting
Fits armchairs and recliners to 36 inch
Pros
- Chair upholstery stays visible underneath
- Wipes clean with a damp cloth
- Good for storage and moving
- Quick elastic on and off
Cons
- No bottom panel so the lower section stays uncovered
- Not claw proof against a determined cat
- Wipe clean only and cannot be machine washed
This is the odd one out in the list and we include it because there are situations where it is exactly right. The vinyl is genuinely clear, so the chair’s original upholstery and stitching stay visible underneath. That means you can protect a chair for a few weeks without changing how the room looks, which is useful when the chair is being moved, stored, or freshly delivered and you are waiting for the textile cover you actually want.
It also measures generously at 42 inches for the backrest height, 25 inches for the armrest height, 36 inches wide and 40 inches deep, so it fits most standard armchairs, recliners and sofa chairs without a size conversation. The elastic closure goes on and comes off in seconds.
Cleaning is a damp cloth and nothing else. You cannot machine wash it, and you should not try, because heat will warp the plastic. For a chair in a pet household this is a real limitation, but for a temporary cover it works well, because there is no lint to pick up and no fabric to absorb an odour.
The waterproofing is total, which makes it a reasonable emergency measure for a pet who has had an accident on a chair you do not want to clean. Owners do report using it for exactly that during periods when the pet is unwell or a new puppy is in the house.
Know what a plastic cover cannot do
Three things. First, there is no bottom panel, so the lower section of the chair is never covered, and that is where damp accidents pool and where a determined cat will work underneath the edge. Buyers on the r/cats thread asking how to stop scratching are essentially describing a problem this product will not solve for them.
Second, it is not claw-proof. Reviews are blunt that determined cats can claw through plastic or slip underneath it, and any cover with a crinkly surface attracts attention in the first place. Third, it traps heat, and the plastic rustles every time somebody sits down or the chair moves.
Who should skip it
Skip it as a permanent cover for a chair somebody sits in every day. It is a short-term shield for storage, moving and short-term accident risk, and nothing more. In a shared home or a quiet apartment, the noise alone tends to rule it out.
It is also the wrong choice for anyone who plans to launder covers regularly. Because it cannot be washed, it either gets wiped down indefinitely or ends up in storage, and in both cases you end up buying a second cover anyway.
9. H.VERSAILTEX 100% Waterproof Power Lift Recliner Cover, Lily Pad 23 inch
H.VERSAILTEX 100% Waterproof Recliner Chair Covers Anti-Slip Recliner Cover for Electric Power Lift Recliner Chair Washable Recliner Slipcover with Pocket, Elastic Straps for Pets, Dogs,Lily Pad/Beige
Double-sided waterproof microfiber with TPU
Backed with 100 percent waterproof TPU
Footrest elastic band
Seats up to 23 inch
Pros
- Built for electric power lift recliners
- Waterproof TPU composite on both sides
- Widened waterproof edging at seams
- Adjustable straps at back and footrest
Cons
- Lowest average rating in this group at 4.1
- Heaviest cover here at 1.9 pounds
This is one of the few covers in the roundup designed from the start for an electric power lift recliner rather than adapted from an ordinary recliner cover. It fits a sitting width up to 23 inches in a dedicated power lift size, and the fixation system is built for a chair that moves: adjustable elastic straps at the back, elastic straps at the seat corners, and an elastic band at the footrest.
The waterproofing is the most thorough in this group. It is a double-sided fabric with surface waterproof technology and a 100 percent waterproof TPU composite on the back, and the seams and splices are finished with a widened waterproof edging strip. Widened seam tape is where most waterproof covers fail first, because a stitched seam is always the weak point in a barrier.
Decoratively it is a quilted texture with an artistic double diamond geometric pattern and lofty poly fill over microfiber, so it does not read as a medical pad. Care is a cold gentle machine wash, no bleach and a tumble dry on low, which is one of the more forgiving care instructions in the category.
Owners appreciate the waterproof construction and the tailored power lift cut. The recurring reservation is value, and the 4.1 average is the lowest of the ten covers we reviewed, so treat that number as the honest summary of where mixed opinions sit.
When footrest banding actually matters
The footrest band is the detail that separates this cover from most of the list. On a power lift chair the footrest extends, the back shifts and the whole frame rocks forward, and a cover held only by grip will migrate during that movement. A band across the footrest gives it something to tension against, so it stays where you put it.
It matters most in the reclined position, where a dog usually lies. That is the position where hair, drool and accidents concentrate, and it is also the position where an unsecured cover is most likely to have bunched up into a pile under the pet rather than lying flat.
Who should skip it
Skip it if you are on a tight budget or if you want a cover with a very large review base behind it. At 4.1 across more than 200 reviews, this is a solid product with real design merit, but it is not the safest recommendation for someone who cannot easily return a purchase.
It is also the heaviest cover here at 1.9 pounds, and the TPU composite makes it stiff in the hand. For someone who needs to strip and wash the cover frequently, that combination is more effort than a softer quilted option.
10. Turquoize 100% Waterproof Power Lift Recliner Cover, Grey 22 inch
Turquoize 100% Waterproof Power Lift Recliner Cover for Elderly Non Slip Recliner Slipcovers for Power Lift Recliner Chairs Recliner Protector for Elderly,Kids,Dog (Power Lift Recliner 22″, Gray)
Compound waterproof layer in fabric
Silicone drop backing with elastic loops
Extra loops at the footrest
Seats up to 22 inch
Pros
- Elastic loops attach to the recliner frame hardware
- Footrest loops as well as seat loops
- Waterproof compound fabric layer
- Machine washable cold and tumble dry low
Cons
- Narrowest fit in this roundup at 22 inches
- Lowest review count of the ten covers
This is the most mechanically aware cover in the roundup, and the detail that wins it fans of power lift chairs is how it fixes. The elastic loops on the back cover attach directly to the recliner’s bottom hardware, rather than hooking onto the fabric and relying on friction. Extra loops are provided at the footrest as well. Very few covers in this category connect to the chair frame at all.
Waterproofing comes from a compound waterproof layer built into the fabric, paired with a water-repellent surface. It is 100 percent polyester, weighs 1.4 pounds and carries a modern solid grey finish with a microfiber diamond quilt fill, which is the part that retains pet body heat and adds a layer of defence against dander, dirt and light scratching.
Care is a machine wash on cold on its own, tumble dry low and no bleach. Washing it separately is worth obeying, because a stiff TPU-backed cover next to a soft quilt in the same load is how both end up creased.
Why the frame loops are the deciding feature
On a power lift chair the cover has three things working against it: the pet climbing on, the chair rocking forward as it lifts, and gravity pulling loose material down toward the footrest. Grip backing handles the first. Almost nothing handles the second and third, which is exactly what the frame loops and footrest loops do.
The trade-off is installation time. These loops have to be reached and attached each time the cover goes on, so this is not the cover you strip and rinse twice a week. It is the cover you fit properly and leave in place for months.
Who should skip it
Skip it if your lift chair has a seat wider than 22 inches. That is the narrowest fit in the roundup, so on a standard 23 to 24 inch chair this will be tight, and tight covers crease at the arms and pull at the seams. Oversized options are listed for this reason, so check the size options rather than assuming.
It also carries the smallest review base here, at 119 ratings averaging 4.2. The design reasoning is sound and the hardware approach is the best we found, but there is less long-term evidence behind it than the covers earlier in this list, so buy it from a retailer with a generous return window.
How to Choose a Lift Chair Cover for Pets
Every pick above clears the same three gates, and the buying decisions are really about which of those three matters most in your house. Before comparing fabrics, get the measurements right. A correct cover on a correctly measured chair solves most complaints people have about the whole category, and our cover testing notes on fit and protection apply to furniture covers generally, not just to vehicles.
Measure your lift chair in five dimensions before you buy
Most listings quote one number, and it is almost always the sitting width. That single figure is not enough, because a cover can fit the seat and still be wrong for the back or the arms.
Sitting width. Measure across the seat cushion between the inner arms, not the total chair width. Most covers here run 22 to 23.6 inches, with one oversized option to 30 inches and one large-recliner set rated 24 to 33 inches.
Seat depth. Front edge of the cushion to the back of the seat back. This decides whether the cover reaches far enough forward to catch drool before it rolls off.
Back height. Floor to the top of the back rest. Quilted covers that reach the top need this number; the plastic option in this list is quoted at 42 inches.
Arm width and arm height. Most important for split-panel sets, where a two-panel arm cover is sized by the arm rather than the chair. One cover here lists an armrest width of 22 inches and a back length of 48.8 inches.
Footrest position. Measure with the chair fully reclined and fully lifted, because the footrest extends into the gap. A cover that fits the upright chair can ride up once the mechanism moves.
Lift chair mechanics: footrest, remote clearance and recline movement
This is where lift chair covers diverge from ordinary recliner covers, and it is the section most buying guides skip. A power lift chair has a scissor or hydraulic frame under the seat, a footrest that rises when the chair lifts, a back that shifts as the chair reclines, and controls that are usually either a wired handset or buttons mounted on the inside of the arm.
Three questions decide whether a cover works on that chair. Does the cover stay clear of the remote and the side controls? Does it clear the footrest as it extends? And does it stay fixed while the frame rocks forward through a lift cycle? A cover that answers all three can stay on permanently. A cover that answers none of them will be off the chair within a week.
On control clearance, check whether the design leaves the inside of the arm accessible and whether there is a pocket positioned within reach of a hand resting on the arm. Covers with a pocket on one side only are fine if the user is consistent about which side they sit on and less fine if a caregiver approaches from either direction.
On the footrest, look for either a dedicated band or loops at the footrest, or a cover that is long enough to tuck into the front of the footrest when the chair is upright. The footrest is also the highest-risk zone for mess, because drool, water bowl drips and muddy paw prints all end up there while the chair is in the raised position.
On movement, non-slip backing handles a pet climbing on. Almost nothing handles the chair itself moving, which is why the covers with elastic loops that attach to the recliner’s bottom hardware are worth considering for a chair that is used several times a day.
One more mechanical caution. Avoid anything that ties tightly around the seat cushion or under the arms, because a cover under tension can restrict the recline movement or bunch under the frame. If a cover feels like it is pulling when the chair moves, it is the wrong fit rather than a faulty product.
Cover types compared: quilted throw, stretch slipcover, fitted set and vinyl
There are four construction types in this category, and they suit different households.
Quilted drape covers. Multi-layer fabric with a waterproof layer inside and grip backing underneath. Best all-round choice for hair, spills and accidents. This is where most of our picks sit.
Stretch slipcovers. Thinner, tighter and cooler. Best for a light-shedding pet and a chair in a warm room, worst for claws and for spills.
Fitted panel sets. Separate back, footrest and arm pieces. Best for refreshing a dated chair or replacing only the worn parts, but not waterproof in the option we reviewed.
Clear vinyl. Wipe-clean, fully waterproof, invisible. Best for storage, moving and temporary protection. Worst for comfort, noise and claws.
A second cover is worth considering once you have settled on a type. Users routinely run two in rotation so the chair is never bare while one is in the wash, and a cover that is easy to remove and put back on is the one that actually gets laundered. That is the argument for cinch cords, short elastic straps and pull-off shells over covers with extensive tucking.
Waterproof versus water-resistant, and why the labels mislead
This is the most inflated claim in the category, and buyers checking carefully is the fastest way to filter it. A water-resistant fabric has a treatment on the surface that slows liquid down. A waterproof fabric has a continuous barrier layer inside or behind the fabric that liquid does not pass through at all.
Three ways to tell them apart from a listing. Look for a named barrier material such as TPU or a compound waterproof layer rather than the word water-repellent. Look for what happens at the seams, because stitching is where barriers fail and only some covers finish their seams with a waterproof edging strip. And look for a multi-layer build, because a coat of waterproofing on a single layer of fabric wears off after washing.
On caring for a cover, shake fur off outside before it goes in the machine, wash in cold water on a gentle cycle, avoid bleach, and dry fully before reinstalling. Reinstalling a damp cover traps moisture against the upholstery and creates exactly the odour problem you bought the cover to prevent.
Comfort for the person who sits in the chair all day
The cover is a surface somebody’s bare skin and legs touch for hours, so comfort is a safety issue rather than a nicety. Look for a soft inner fill and a fabric that does not feel clammy, and be suspicious of covers whose entire top layer is a waterproof film, because those feel cold in winter and sticky in summer.
Watch the bulk at the armrests. A thick quilted arm cover can make it harder to push up out of the seat, which is the exact moment when a limited-mobility user needs a firm grip. If transfers are already difficult, choose a cover with a flatter arm panel and test it with somebody who needs to get out of the chair before you commit.
Noise is worth a thought too, particularly in a quiet apartment or a shared room. Crinkly plastic-backed covers rustle every time the chair moves, and if a light sleeper or a shift worker uses the chair, that becomes a nightly problem rather than a minor irritation.
Why many covers in this category have mediocre reviews
Across this list the ratings sit between 4.1 and 4.6, which is respectable, but the category in general carries a reputation for poor ratings. That reputation is usually earned by three specific problems rather than by bad products.
The first is fit. Wrong-size covers crease, ride up and leave parts of the chair exposed, and reviewers punish that heavily. The second is false waterproofing, where a cover that soaked through gets described as though the product were fraudulent rather than mismatched to its listing. The third is grip failure, where a cover slides on leather and the owner assumes the anti-slip claim was invented.
None of those are solved by buying a more expensive cover. They are solved by measuring before ordering, checking whether the barrier is a real layer rather than a treatment, and matching the backing to the chair’s upholstery. Two covers in this roundup cover leather explicitly; the rest rely on a patterned backing that we would test on your chair before committing.
How We Picked and Why You Can Trust This List
We treated this as a three-gate filter rather than a ranking by rating alone. Every cover had to be designed for a recliner or power lift recliner, had to stay clear of the mechanism, and had to be comfortable for a seated human. Products were compared on the published construction details, the stated size ranges, the care instructions and the pattern of reported issues in buyer reviews.
Ratings alone were not treated as decisive, because the two covers with the largest review bases sit at 4.4 and the highest-rated cover sits at 4.6 on a much smaller base. Our picks weight breadth of evidence and fit information more heavily than a single high score.
Pricing and availability were checked on 2 October 2026. Covers in this category change often and retailers differ on returns, commonly 90 days at some large retailers against 30 days elsewhere, so check the return window where you buy. Our picks do not change with price, and we refresh the list every few months as fit information and review patterns shift.
Frequently Asked Questions
Can you put a cover on a lift chair?
Yes. A cover goes on a power lift chair as long as it clears three things: the remote and any side control buttons, the footrest as it extends, and the chair’s lift and recline movement. Choose a stretch or tuck-in design over a fitted one that pulls tight, and check that any pocket sits within reach of a hand resting on the arm. Avoid anything tied firmly around the seat cushion, because tension can restrict the mechanism.
What are the best recliner pet covers?
The best overall pick is the Ameritex waterproof nonslip recliner cover, with the largest review base and the widest size range in the category. For grip under a large active dog, the TAOCOCO cover with colloid backing, straps and a buckle is the strongest option. For a chair that doubles as the pet’s bed, the Furhaven cover with a waterproof core and cushion anchors works best.
How do I protect a recliner from dogs?
Measure the sitting width, seat depth, back height and arm width first, then choose a cover with a real waterproof layer rather than a surface treatment. Pick a backing that suits the upholstery, since patterned grip holds on leather and cloth. Cover the footrest and both arms, since that is where drool and paw prints land. Buy a second cover so you can rotate while one is in the wash.
What is the best waterproof furniture cover for pets?
Among the covers we reviewed, the H.VERSAILTEX power lift cover has the most complete barrier, with a 100 percent waterproof TPU composite on the back of the fabric and a widened waterproof edging strip over the seams and splices. The VANSOFY and TAOCOCO covers also use full waterproof layers rather than coatings. Check for a named barrier material, because water-repellent wording often describes a slower-absorbing coating, not a true barrier.
How do I protect a chair from an incontinent dog?
Use a full-area waterproof barrier covering the seat, back, both arms and the footrest rather than a seat-only cover. Choose a multi-layer build with an internal waterproof layer and waterproof seam edging, since accidents reach the seams first. Keep a second cover so the chair is never bare while the first is being washed, and wash immediately on a cold gentle cycle. Clear vinyl is an option for short-term protection but cannot be machine washed.
Why do so many pet furniture covers have mediocre reviews?
Most poor ratings come from three problems rather than bad products. Fit failures, where the wrong size creases, rides up or leaves the chair partly exposed. Inflated waterproof claims, where a cover without a real barrier layer soaks through. And grip failures on smooth leather, where the cover slides and the owner assumes the anti-slip claim was invented. Measuring first and checking the backing material prevents most of them.
The Best Lift Chair Covers for Pets in 2026, by Use Case
The best lift chair covers for pets come down to one question: what is your pet actually going to put on this chair. If the answer is hair and general wear, the Ameritex cover is the pick we would buy first, because its review base and size range make it the safest gamble. If the answer is water, the accidents and the extended footrest, choose a full waterproof layer such as the H.VERSAILTEX or TAOCOCO, and add a second cover for rotation.
Every cover in this roundup was checked against a power lift chair rather than an ordinary recliner, because that is where covers normally fail. Measure your chair in five dimensions, confirm the remote stays reachable, and buy from a retailer with a generous return window so you can test the fit with a week of real use behind you.